No, yum installed both mplayer and mencoder.
On 2/1/06, Justin Wetherell <[EMAIL PROTECTED]> wrote:
> Did you complie Mplayer yourself?
>
>
>
> On 2/1/06, Stian Næprud <[EMAIL PROTECTED]> wrote:
> > No, still segmentation fault with your command. This on work though
> > (with outfmt=rgb24) Just found that option for outfmt, dont know what
> > it means... Should I just use that?:
> >
> > mencoder -tv
> driver=v4l2:fps=25:norm=PAL-DK:device=/dev/video0:input=2:width=768:height=576:outfmt=rgb24:contrast=25:brightness=60:hue=50:saturation=50:adevice=/dev/dsp:forceaudio:forcechan=1:audiorate=32000:volume=50:buffersize=64
> > tv:// -o /home/freevo/Video/Recordings/tv2.avi -ovc lavc
> -lavcopts
> > vcodec=mpeg4:vbitrate=1200 -oac mp3lame -lameopts br=128:cbr:mode=3
> > -ffourcc divx
> >
> > On 1/29/06, Justin Wetherell < [EMAIL PROTECTED]> wrote:
> > > try this:
> > >
> > > mencoder tv:// -tv
> > >
> driver=v4l2:input=2:norm=PAL-DK:channel=4:width=768:height=576:outfmt=yuy2:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forceaudio:forcechan=1:buffersize=64
> > > -ovc lavc -lavcopts vcodec=mpeg4:vqscale=3 -oac mp3lame -lameopts
> vbr=2:q=3
> > > -ffourcc divx -o tv2.avi
> > >
> > > You also seem to be missing a "chanlist=" variable.
> > >
> > >
> > > On 1/29/06, Stian Næprud < [EMAIL PROTECTED] > wrote:
> > > > Sorry, same error.
> > > >
> > > > On 1/28/06, Justin Wetherell < [EMAIL PROTECTED] > wrote:
> > > > > Try removing this option from mencoder: -aspect 4:3
> > > > >
> > > > >
> > > > > On 1/28/06, Stian Næprud <[EMAIL PROTECTED] > wrote:
> > > > > >
> > > > > > Thanks! Will do when I get there. Now I get a segmentation fault
> > > > > > trying mencoder with the same options as mplayer. If I do it
> without
> > > > > > the "outfmt=yuy2" it records, but only half og the picture shows,
> rest
> > > > > > is black.
> > > > > >
> > > > > > mencoder -tv
> > > > >
> > >
> driver=v4l2:fps=25:norm=PAL-DK:device=/dev/video0:input=2:width=768:height=576:outfmt=yuy2:contrast=25:brightness=60:hue=50:saturation=50:adevice=/dev/dsp:forceaudio:forcechan=1:audiorate=32000:volume=100:buffersize=64
> > > > > > tv:// -aspect 4:3 -o tv2.avi -ovc lavc -lavcopts
> > > > > > vcodec=mpeg4:vbitrate=1200 -oac mp3lame -lameopts
> br=128:cbr:mode=3
> > > > > > -ffourcc divx
> > > > > >
> > > > > > Using GNU internationalization
> > > > > > Original domain: messages
> > > > > > Original dirname: /usr/share/locale
> > > > > > Current domain: mplayer
> > > > > > Current dirname: /usr/share/locale
> > > > > >
> > > > > > MEncoder 1.0pre7-3.4.3 (C) 2000-2005 MPlayer Team
> > > > > > CPU: Intel Pentium 4/Xeon/Celeron Foster (Family: 8, Stepping: 9)
> > > > > > Detected cache-line size is 64 bytes
> > > > > > CPUflags: Type: 8 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
> > > > > > Compiled with runtime CPU detection - WARNING - this is not
> optimal!
> > > > > > To get best performance, recompile MPlayer with
> > > > > --disable-runtime-cpudetection.
> > > > > > File not found: 'frameno.avi '
> > > > > > Failed to open frameno.avi
> > > > > > success: format: 9 data: 0x0 - 0x0
> > > > > > TV detected! ;-)
> > > > > > Selected driver: v4l2
> > > > > > name: Video 4 Linux 2 input
> > > > > > author: Martin Olschewski < [EMAIL PROTECTED] >
> > > > > > comment: first try, more to come ;-)
> > > > > > Selected device: Hauppauge WinTV 34xxx models
> > > > > > Tuner cap: STEREO LANG1 LANG2
> > > > > > Tuner rxs: MONO
> > > > > > Capabilites: video capture VBI capture device tuner read/write
> > > > > streaming
> > > > > > supported norms: 0 = NTSC-M; 1 = NTSC-JP; 2 = PAL-BG; 3 = PAL-DK;
> 4 =
> > > > > > PAL-I; 5 = PAL-M; 6 = PAL-N; 7 = PAL-Nc; 8 = PAL-60; 9 = SECAM-L;
> 10 =
> > > > > > SECAM-DK;
> > > > > > inputs: 0 = Television; 1 = for debug only; 2 = Composite1; 3 =
> > > S-Video;
> > > > > > Current input: 2
> > > > > > Current format: BGR24
> > > > > > v4l2: current audio mode is : MONO
> > > > > > audio block size too low, setting to 8192!
> > > > > > [V] filefmt:9 fourcc:0x32595559 size:768x576
> > > fps:25.00
> > > > > ftime:= 0.0400
> > > > > >
> > > > >
> > >
> ==========================================================================
> > > > > > Opening audio decoder: [pcm] Uncompressed PCM audio decoder
> > > > > > AUDIO: 32000 Hz, 1 ch, s16le, 512.0 kbit/100.00% (ratio:
> 64000->64000)
> > > > > > Selected audio codec: [pcm] afm:pcm (Uncompressed PCM)
> > > > > >
> > > > >
> > >
> ==========================================================================
> > > > > > Opening video filter: [expand osd=1]
> > > > > > Expand: -1 x -1, -1 ; -1 (-1=autodetect) osd: 1
> > > > > >
> > > > >
> > >
> ==========================================================================
> > > > > > Opening video decoder: [raw] RAW Uncompressed Video
> > > > > > VDec: vo config request - 768 x 576 (preferred csp: Packed YUY2)
> > > > > > Could not find matching colorspace - retrying with -vf scale...
> > > > > > Opening video filter: [scale]
> > > > > > VDec: using Packed YUY2 as output csp (no 0)
> > > > > > Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
> > > > > > SwScaler: reducing / aligning filtersize 1 -> 4
> > > > > > SwScaler: reducing / aligning filtersize 1 -> 4
> > > > > > SwScaler: reducing / aligning filtersize 1 -> 1
> > > > > > SwScaler: reducing / aligning filtersize 9 -> 8
> > > > > >
> > > > > > SwScaler: BICUBIC scaler, from Packed YUY2 to Planar YV12 using
> MMX2
> > > > > > videocodec: libavcodec (768x576 fourcc=34504d46 [FMP4])
> > > > > > Selected video codec: [rawyuy2] vfm:raw (RAW YUY2)
> > > > > >
> > > > >
> > >
> ==========================================================================
> > > > > > Forcing output fourcc to 78766964 [divx]
> > > > > > MP3 audio selected
> > > > > > Building audio filter chain for 32000Hz/1ch/s16le ->
> > > 32000Hz/1ch/s16le...
> > > > > > Writing AVI header...
> > > > > > ODML: Aspect information not (yet?) available or unspecified, not
> > > > > > writing vprp h eader.
> > > > > > Forcing audio preload to 0, max pts correction to 0
> > > > > > Segmentation fault
> > > > > >
> > > > > > On 1/27/06, Justin Wetherell < [EMAIL PROTECTED]> wrote:
> > > > > > > You can mute and unmute the line-in with the PRE and POST
> commands
> > > then
> > > > > > > everything should work fine.
> > > > > > >
> > > > > > >
> > > > > > > On 1/27/06, Stian Næprud < [EMAIL PROTECTED] > wrote:
> > > > > > > > Not giving up.... I am trying to understand the mencoder
> commands,
> > > but
> > > > > > > > I thougt it would be best to get the mplayer to work first. I
> am
> > > > > > > > getting a perfect picture with this command, but no sound.
> > > > > > > > mplayer -tv
> > > > > > >
> > > > >
> > >
> driver=v4l2:fps=25:norm=PAL-DK:device=/dev/video0:input=2:width=768:height=576:outfmt=yuy2:contrast=25:brightness=60:hue=50:saturation=50:adevice=/dev/dsp:forceaudio:forcechan=1:audiorate=32000:volume=100:buffersize=64
> > > > > > > > tv:// -aspect 4:3
> > > > > > > >
> > > > > > > > I also tried with adevice=alsa. If I start aumix and turn up
> the
> > > line
> > > > > > > > input sound is fine. Is there anything else I should add to
> this
> > > > > > > > command?
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > On 1/25/06, John Molohan < [EMAIL PROTECTED]> wrote:
> > > > > > > > > Copy the entire command into a terminal and see if mplayer
> fails
> > > and
> > > > > if
> > > > > > > > > so on which option.
> > > > > > > > >
> > > > > > > > > Stian Næprud wrote:
> > > > > > > > >
> > > > > > > > > >No sorry.... I am not sure. How should I know? I am running
> a
> > > > > Fedora
> > > > > > > > > >Core 3. Any idea what I should check or look for. I can
> watch
> > > the
> > > > > > > > > >composite input fine in TvTime. Thats all I know. I do not
> know
> > > > > much
> > > > > > > > > >about video in linux...
> > > > > > > > > >
> > > > > > > > > >On 1/25/06, Justin Wetherell < [EMAIL PROTECTED]>
> wrote:
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >>tv:// -tv
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>driver=v4l:input=1:norm=pal:width=320:height=240:outfmt=yuy2:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forceaudio:forcechan=1:buffersize=64
> > > > > > > > > >>-ovc lavc -lavcopts vcodec=mpeg4:vqscale=3 -oac mp3lame
> > > -lameopts
> > > > > > > > > >>br=128:cbr:mode=3 -ffourcc divx
> > > > > > > > > >>
> > > > > > > > > >>Are you sure that the line above if correct for recording
> on
> > > your
> > > > > > > system?
> > > > > > > > > >>
> > > > > > > > > >>On 1/25/06, Stian Næprud < [EMAIL PROTECTED] >
> wrote:
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>Nothing gets recorded. Looks like the recordserver give
> up.
> > > > > > > > > >>>
> > > > > > > > > >>>2006/01/25 16:16 CET [-] Log opened.
> > > > > > > > > >>>2006/01/25 16:16 CET [-]
> > > > > > > > > >>>
> > > > > > > > > >>>
> > > > > > > > >
> > > >>*************************************************
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>2006/01/25 16:16 CET [-] ** Warning: No recording plugin
> > > > > registered.
> > > > > > > **
> > > > > > > > > >>>2006/01/25 16:16 CET [-] ** Check your
> > > local_conf.py
> > > > > for a
> > > > > > > **
> > > > > > > > > >>>2006/01/25 16:16 CET [-] ** bad "plugin_record
> ="
> > > line
> > > > > or
> > > > > > > **
> > > > > > > > > >>>2006/01/25 16:16 CET [-] ** this log for a
> plugin
> > > > > failure.
> > > > > > > **
> > > > > > > > > >>>2006/01/25 16:16 CET [-] ** Recordings will
> fail!
> > > > > > > **
> > > > > > > > > >>>2006/01/25 16:16 CET [-]
> > > > > > > > > >>>
> > > > > > > > > >>>
> > > > > > > > >
> > > >>*************************************************
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>2006/01/25 16:16 CET [*RecordServer*]
> twisted.web.server.Site
> > > > > > > starting on
> > > > > > > > > >>>
> > > > > > > > > >>>
> > > > > > > > > >>18001
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>2006/01/25 16:16 CET [*RecordServer*] Starting factory
> > > > > > > > > >>>< twisted.web.server.Site instance at 0xb75e40cc>
> > > > > > > > > >>>2006/01/25 16:21 CET [*RecordServer*] Sending CMP_PRE_REC
> > > > > > > > > >>>2006/01/25 16:21 CET [*RecordServer*] popen tv:// -tv
> > > > > > > > > >>>
> > > > > > > > > >>>
> > > > > > > > > >>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>driver=v4l:input=1:norm=pal:width=320:height=240:outfmt=yuy2:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forceaudio:forcechan=1:buffersize=64
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>-ovc lavc -lavcopts vcodec=mpeg4:vqscale=3 -oac mp3lame
> > > -lameopts
> > > > > > > > > >>>br=128:cbr:mode=3 -ffourcc divx -endpos 229 -o
> > > > > > > > > >>>
> > > > > > > > > >>>
> > > > > > > > > >>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>/home/freevo/Video/Recordings/01-25_16_21_Manual_Record.avi
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>2006/01/25 16:21 CET [*RecordServer*] killing pid 5388
> with
> > > sig
> > > > > 15
> > > > > > > > > >>>2006/01/25 16:21 CET [*RecordServer*] recorderver: After
> > > wait()
> > > > > > > > > >>>2006/01/25 16:21 CET [*RecordServer*] waiting on pid 5388
> > > > > > > > > >>>2006/01/25 16:21 CET [*RecordServer*] no imagefile found
> > > > > > > > > >>>2006/01/25 16:21 CET [*RecordServer*] Sending
> CMP_POST_REC
> > > > > > > > > >>>
> > > > > > > > > >>>On 1/25/06, Stian Næprud < [EMAIL PROTECTED]>
> wrote:
> > > > > > > > > >>>
> > > > > > > > > >>>
> > > > > > > > > >>>>I will try it later to day. Yes please give me the link
> to
> > > the
> > > > > > > update.
> > > > > > > > > >>>>
> > > > > > > > > >>>>On 1/25/06, Justin Wetherell < [EMAIL PROTECTED]>
> > > wrote:
> > > > > > > > > >>>>
> > > > > > > > > >>>>
> > > > > > > > > >>>>>Actually, I found the error and fixed it but it's not a
> big
> > > > > thing.
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>Update
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>available via link, if you'd like it.
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>On 1/24/06, Justin Wetherell < [EMAIL PROTECTED]>
> > > wrote:
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>I get the same error but it all seems to work
> correctly,
> > > so I
> > > > > just
> > > > > > > > > >>>>>>
> > > > > > > > > >>>>>>
> > > > > > > > > >>ignore
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>it.
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>
> > > > > > > > > >>>>>>On 1/24/06, Stian Næprud < [EMAIL PROTECTED] >
> > > wrote:
> > > > > > > > > >>>>>>
> > > > > > > > > >>>>>>
> > > > > > > > > >>>>>>>Thanks! Getting another error now....
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>2006/01/24 20:17 CET [-] Log opened.
> > > > > > > > > >>>>>>>2006/01/24 20:17 CET [-]
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > >
> > > > >
> >>>>>*************************************************
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>2006/01/24 20:17 CET [-] ** Warning: No recording
> plugin
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>registered.
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>**
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>2006/01/24 20:17 CET [-] ** Check your
> > > > > local_conf.py
> > > > > > > for
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>a
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>**
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>2006/01/24 20:17 CET [-] ** bad
> "plugin_record
> > > ="
> > > > > line
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>or
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>**
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>2006/01/24 20:17 CET [-] ** this log for a
> > > plugin
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>failure.
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>**
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>2006/01/24 20:17 CET [-] ** Recordings will
> > > fail!
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>**
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>2006/01/24 20:17 CET [-]
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > >
> > > > >
> >>>>>*************************************************
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>2006/01/24 20:17 CET [*RecordServer*]
> > > twisted.web.server.Site
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>starting
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>on
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>What should I set in the local_conf?
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>On 1/24/06, Justin Wetherell < [EMAIL PROTECTED]
> >
> > > > > wrote:
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>>I changed it on the website, if that helps.
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>On 1/24/06, Justin Wetherell <
> [EMAIL PROTECTED] >
> > > > > wrote:
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>>Whooops.... change rec_prog.channel_id to
> > > prog.channel_id
> > > > > on
> > > > > > > > > >>>>>>>>>
> > > > > > > > > >>>>>>>>>
> > > > > > > > > >>line
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>1004.
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>>
> > > > > > > > > >>>>>>>>>On 1/24/06, Stian Næprud < [EMAIL PROTECTED]
> >
> > > wrote:
> > > > > > > > > >>>>>>>>>
> > > > > > > > > >>>>>>>>>
> > > > > > > > > >>>>>>>>>>Getting closer... But I get an error in the
> > > > > recordserverlog:
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>2006/01/24 20:31 CET [*RecordServer*] Sending
> > > CMP_PRE_REC
> > > > > > > > > >>>>>>>>>>2006/01/24 20:31 CET [*RecordServer*] popen
> tv://
> > > -tv
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>driver=v4l:input=1:norm=pal:width=320:height=240:outfmt=yuy2:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forceaudio:forcechan=1:buffersize=64
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>-ovc lavc -lavcopts vcodec=mpeg4:vqscale=3 -oac
> > > mp3lame
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>-lameopts
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>br=128:cbr:mode=3 -ffourcc divx -endpos 229 -o
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>/home/freevo/Video/Recordings/01-24_20_31_Manual_Record.avi
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>2006/01/24 20:31 CET [*RecordServer*] killing pid
> 4669
> > > > > with
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>sig 15
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>2006/01/24 20:31 CET [*RecordServer*] recorderver:
> > > After
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>wait()
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>2006/01/24 20:31 CET [*RecordServer*] waiting on
> pid
> > > 4669
> > > > > > > > > >>>>>>>>>>2006/01/24 20:31 CET [*RecordServer*] no imagefile
> > > found
> > > > > > > > > >>>>>>>>>>2006/01/24 20:31 CET [*RecordServer*] Traceback
> (most
> > > > > recent
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>call
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>last):
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>>> File
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>"/usr/lib/python2.3/site-packages/twisted/python/log.py",
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>line
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>>>52, in callWithContext
> > > > > > > > > >>>>>>>>>> return context.call({ILogContext:
> newCtx},
> > > > > func,
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>*args,
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>**kw)
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>>> File
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>"/usr/lib/python2.3/site-packages/twisted/python/context.py",
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>line 43, in callWithContext
> > > > > > > > > >>>>>>>>>> return func(*args,**kw)
> > > > > > > > > >>>>>>>>>> File
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>"/usr/lib/python2.3/site-packages/twisted/internet/default.py",
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>line 126, in run
> > > > > > > > > >>>>>>>>>> self.mainLoop()
> > > > > > > > > >>>>>>>>>> File
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>"/usr/lib/python2.3/site-packages/twisted/internet/default.py",
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>line 134, in mainLoop
> > > > > > > > > >>>>>>>>>> self.runUntilCurrent()
> > > > > > > > > >>>>>>>>>> --- <exception caught here> ---
> > > > > > > > > >>>>>>>>>> File
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>"/usr/lib/python2.3/site-packages/twisted/internet/base.py",
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>line 423, in runUntilCurrent
> > > > > > > > > >>>>>>>>>> call.func(*call.args, **call.kw)
> > > > > > > > > >>>>>>>>>> File
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>"/usr/lib/python2.3/site-packages/freevo/helpers/recordserver.py",
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>line 1004, in handleEvents
> > > > > > > > > >>>>>>>>>> if config.CMP_POST_REC and
> > > rec_prog.channel_id
> > > > > ==
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>'composite':
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>>> exceptions.NameError: global name
> 'rec_prog' is
> > > not
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>defined
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>On 1/24/06, Justin Wetherell <
> [EMAIL PROTECTED]
> > > >
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>wrote:
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>>I made a special patch to record/watch from a
> > > composite
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>input,
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>you
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>need to
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>>>>add this to your local_config.py:
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>># Composite Recordings
> > > > > > > > > >>>>>>>>>>>CMP_INPUT = 1
> > > > > > > > > >>>>>>>>>>>CMP_PRE_REC = ('amixer sset Mic unmute cap');
> > > > > > > > > >>>>>>>>>>>CMP_CMD = ( CONF.mencoder + ' ' +
> > > > > > > > > >>>>>>>>>>> 'tv:// ' +
> > > > > > > > > >>>>>>>>>>> '-tv driver=%s:input=%d' % (TV_DRIVER,
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>CMP_INPUT) +
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>> ':norm=%s' % CONF.tv +
> > > > > > > > > >>>>>>>>>>> ':width=%d:height=%d' %
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>>>>(TV_REC_SIZE[0],
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>TV_REC_SIZE[1]) +
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>>>> ':outfmt=%s' % TV_REC_OUTFMT +
> > > > > > > > > >>>>>>>>>>> ':device=%s' % TV_DEVICE +
> > > > > > > > > >>>>>>>>>>> VCR_AUDIO + ' ' +
> > > > > > > > > >>>>>>>>>>> '-ovc lavc -lavcopts ' +
> > > > > > > > > >>>>>>>>>>> 'vcodec=mpeg4' +
> > > > > > > > > >>>>>>>>>>> ':vqscale=3 ' +
> > > > > > > > > >>>>>>>>>>> '-oac mp3lame -lameopts ' +
> > > > > > > > > >>>>>>>>>>> 'br=128:cbr:mode=3 ' +
> > > > > > > > > >>>>>>>>>>> '-ffourcc divx ' +
> > > > > > > > > >>>>>>>>>>> '-endpos %(seconds)s ' +
> > > > > > > > > >>>>>>>>>>> '-o %(filename)s')
> > > > > > > > > >>>>>>>>>>>CMP_POST_REC = ('amixer sset Mic mute');
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>and then add a channel to TV_CHANNELS:
> > > > > > > > > >>>>>>>>>>>('composite', '01 DIGITAL', '1')
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>You also need to replace the following files:
> > > > > > > > > >>>>>>>>>>>src/tv/plugins/generic_record.py
> > > > > > > > > >>>>>>>>>>>src/helpers/recordserver.py
> > > > > > > > > >>>>>>>>>>>with the attached files.
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>
> > > http://freevohelp.com/FILES/generic_record.py
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>
> http://freevohelp.com/FILES/recordserver.py
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>>On 1/24/06, Davide dada Carboni <
> [EMAIL PROTECTED]
> > > >
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>wrote:
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>>>On 1/24/06, Stian Næprud <
> [EMAIL PROTECTED] >
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>wrote:
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>>>>I think I have posted before, with no
> response....
> > > But
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>I
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>have
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>>>>>>struggled with this for 2 weeks now, trying
> > > different
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>>>>settings
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>found
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>>>>>>in Wiki and mailling lists. So please, some
> gurues
> > > out
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>>>>there, help
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>me
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>>>>>>with this. The audio goes to my default
> soundcard
> > > and
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>line
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>in.
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>>>>>>My card is a Hauppage WinTV GO2 and I am
> running
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>Fedora core
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>3.
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>>>>>>Installed Freevo with yum.
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>>I can watch the composite input in Freevo with
> > > theese
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>>>>settings,
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>but
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>>>>>>how do I record:
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>I suspect you need some VCR_CMD with executes
> > > mencoder.
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>I have
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>the
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>same
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>>>>>card but I use mencoder to get the stream
> directly
> > > from
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>the TV
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>In.
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>In
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>>>>>your case you should find a way to instruct
> mencoder
> > > to
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>acquire from
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>>>>>composite instead of TV.
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>--
> > > > > > > > > >>>>>>>>>>>>La gente vuole le manopole
> > > > > > > > > >>>>>>>>>>>>(Anonimo inventore)
> > > > > > > > > >>>>>>>>>>>>--
> > > > > > > > > >>>>>>>>>>>> http://people.crs4.it/dcarboni
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>-------------------------------------------------------
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>>>This SF.net email is sponsored by: Splunk Inc.
> Do
> > > you
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>grep
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>through
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>log
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>>>>files
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>for problems? Stop! Download the new AJAX
> search
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>engine that
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>makes
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>>>>>searching your log files as easy as surfing the
> > > web.
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>DOWNLOAD
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>SPLUNK!
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > >
> > > > > > > >>
> > > > >
> > >
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > >
> > > > >
> >>>>>_______________________________________________
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>>>>>Freevo-users mailing list
> > > > > > > > > >>>>>>>>>>>>
> [email protected]
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>>
> > > > > > > > >
> > > > > > > >>
> > > > >
> > >
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>>
> > > > > > > > > >>>>>>>>>>--
> > > > > > > > > >>>>>>>>>>Stian Næprud
> > > > > > > > > >>>>>>>>>>Elvevegen
> > > > > > > > > >>>>>>>>>>2642 Kvam
> > > > > > > > > >>>>>>>>>>+47 95 04 82 81
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>-------------------------------------------------------
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>This SF.net email is sponsored by: Splunk Inc. Do
> you
> > > grep
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>through
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>log
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>files
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>>>for problems? Stop! Download the new AJAX search
> > > engine
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>that
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>makes
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>>>>searching your log files as easy as surfing the
> web.
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>DOWNLOAD
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>SPLUNK!
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > >
> > > >>_______________________________________________
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>>Freevo-users mailing list
> > > > > > > > > >>>>>>>>>>
> [email protected]
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > > >>>>>>>>>>
> > > > > > > > >
> > > > > > >
> > > > > >>
> > >
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>>>
> > > > > > > > > >>>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>>
> > > > > > > > > >>>>>>>--
> > > > > > > > > >>>>>>>Stian Næprud
> > > > > > > > > >>>>>>>Elvevegen
> > > > > > > > > >>>>>>>2642 Kvam
> > > > > > > > > >>>>>>>+47 95 04 82 81
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>-------------------------------------------------------
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>This SF.net email is sponsored by: Splunk Inc. Do you
> > > grep
> > > > > > > through
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>log
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>files
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>>>for problems? Stop! Download the new AJAX search
> engine
> > > > > that
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>makes
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>>searching your log files as easy as surfing the web.
> > > > > DOWNLOAD
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>SPLUNK!
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > >
> > > > > > > >>
> > > > >
> > >
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > >
> > > > >
> >>>>>>>_______________________________________________
> > > > > > > > > >>>>>>>Freevo-users mailing list
> > > > > > > > > >>>>>>> [email protected]
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>>>>>>
> > > > > > > > > >>
> > > > > > >
> > > > >
> > >
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>>>>
> > > > > > > > > >>>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>>
> > > > > > > > > >>>>--
> > > > > > > > > >>>>Stian Næprud
> > > > > > > > > >>>>Elvevegen
> > > > > > > > > >>>>2642 Kvam
> > > > > > > > > >>>>+47 95 04 82 81
> > > > > > > > > >>>>
> > > > > > > > > >>>>
> > > > > > > > > >>>>
> > > > > > > > > >>>--
> > > > > > > > > >>>Stian Næprud
> > > > > > > > > >>>Elvevegen
> > > > > > > > > >>>2642 Kvam
> > > > > > > > > >>>+47 95 04 82 81
> > > > > > > > > >>>
> > > > > > > > > >>>
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >>>-------------------------------------------------------
> > > > > > > > > >>>This SF.net email is sponsored by: Splunk Inc. Do you
> grep
> > > > > through
> > > > > > > log
> > > > > > > > > >>>
> > > > > > > > > >>>
> > > > > > > > > >>files
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>>for problems? Stop! Download the new AJAX search engine
> > > that
> > > > > makes
> > > > > > > > > >>>searching your log files as easy as surfing the web.
> > > DOWNLOAD
> > > > > > > SPLUNK!
> > > > > > > > > >>>
> > > > > > > > > >>>
> > > > > > > > > >>>
> > > > > > > > > >>
> > > > > > >
> > > > >
> > >
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > >
> > > >>>_______________________________________________
> > > > > > > > > >>>Freevo-users mailing list
> > > > > > > > > >>>[email protected]
> > > > > > > > >
> > > > > > > >>>
> > > > >
> > >
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > > > > > > > >>>
> > > > > > > > > >>>
> > > > > > > > > >>>
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >--
> > > > > > > > > >Stian Næprud
> > > > > > > > > >Elvevegen
> > > > > > > > > >2642 Kvam
> > > > > > > > > >+47 95 04 82 81
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> >-------------------------------------------------------
> > > > > > > > > >This SF.net email is sponsored by: Splunk Inc. Do you grep
> > > through
> > > > > log
> > > > > > > files
> > > > > > > > > >for problems? Stop! Download the new AJAX search engine
> that
> > > > > makes
> > > > > > > > > >searching your log files as easy as surfing the web.
> DOWNLOAD
> > > > > SPLUNK!
> > > > > > > > >
> > > > > > >
> > > > > >
> > >
> http://sel.as-us.falkag.net/sel?cmd=k&kid3432&bid#0486&dat1642
> > > > > > > > >
> > > >_______________________________________________
> > > > > > > > > >Freevo-users mailing list
> > > > > > > > > > [email protected]
> > > > > > > > > >
> > > > > > >
> > > > >
> > >
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > >
> -------------------------------------------------------
> > > > > > > > > This SF.net email is sponsored by: Splunk Inc. Do you grep
> > > through
> > > > > log
> > > > > > > files
> > > > > > > > > for problems? Stop! Download the new AJAX search engine
> that
> > > makes
> > > > > > > > > searching your log files as easy as surfing the web.
> DOWNLOAD
> > > > > SPLUNK!
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > > > > > > >
> _______________________________________________
> > > > > > > > > Freevo-users mailing list
> > > > > > > > > [email protected]
> > > > > > > > >
> > > > > > >
> > > > >
> > >
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Stian Næprud
> > > > > > > > Elvevegen
> > > > > > > > 2642 Kvam
> > > > > > > > +47 95 04 82 81
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > >
> -------------------------------------------------------
> > > > > > > > This SF.net email is sponsored by: Splunk Inc. Do you grep
> through
> > > log
> > > > > > > files
> > > > > > > > for problems? Stop! Download the new AJAX search engine that
> > > makes
> > > > > > > > searching your log files as easy as surfing the web.
> DOWNLOAD
> > > > > SPLUNK!
> > > > > > > >
> > > > > > >
> > > > >
> > >
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > > > > > >
> _______________________________________________
> > > > > > > > Freevo-users mailing list
> > > > > > > > [email protected]
> > > > > > > >
> > > > >
> > >
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Stian Næprud
> > > > > > Elvevegen
> > > > > > 2642 Kvam
> > > > > > +47 95 04 82 81
> > > > > >
> > > > > >
> > > > > >
> > > -------------------------------------------------------
> > > > > > This SF.net email is sponsored by: Splunk Inc. Do you grep through
> log
> > > > > files
> > > > > > for problems? Stop! Download the new AJAX search engine that
> makes
> > > > > > searching your log files as easy as surfing the web. DOWNLOAD
> > > SPLUNK!
> > > > > >
> > > > >
> > >
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > > > > _______________________________________________
> > > > > > Freevo-users mailing list
> > > > > > [email protected]
> > > > > >
> > >
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > > Stian Næprud
> > > > Elvevegen
> > > > 2642 Kvam
> > > > +47 95 04 82 81
> > > >
> > > >
> > > >
> -------------------------------------------------------
> > > > This SF.net email is sponsored by: Splunk Inc. Do you grep through log
> > > files
> > > > for problems? Stop! Download the new AJAX search engine that makes
> > > > searching your log files as easy as surfing the web. DOWNLOAD
> SPLUNK!
> > > >
> > >
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > > _______________________________________________
> > > > Freevo-users mailing list
> > > > [email protected]
> > > >
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > >
> > >
> > >
> >
> >
> > --
> > Stian Næprud
> > Elvevegen
> > 2642 Kvam
> > +47 95 04 82 81
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: Splunk Inc. Do you grep through log
> files
> > for problems? Stop! Download the new AJAX search engine that makes
> > searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
> >
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > _______________________________________________
> > Freevo-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/freevo-users
> >
>
>
--
Stian Næprud
Elvevegen
2642 Kvam
+47 95 04 82 81
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid3432&bid#0486&dat1642
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
