Paul Sijben wrote:
> 
>> Do you keep track of the VideoGroup index? IFAICS this is all you need,
>> with this you have the video device and hence the lockfile name.
>>
>>   
> 
> actually I keep track of the device too. So returning the vdev chosen
> back to the record server was no problem

You only need the index, vg[index].vdev gives you the video device.

>>>> Also you should be aware that it may not be a desirable feature if two
>>>> cards come from two different sources, such as Analogue and DVB-S, so
>>>> there needs to be a way to turn it off. I think using the record_group
>>>> is the best way.
>>>>
>>>>   
>>>>       
>>> You may be right but at this point I am confused. Could you explain to
>>> me the current definition of record_group (and the context of
>>> video_groups) and in the in the case of a setup where one may have a
>>> PVR-500, used for parallel recording on analogue and a DVB card.
>>>     
>>
>> The record_group is an index into the VideoGroup list, starting at 0. If
>> the record_group is not None then it uses this VideoGroup to record. The
>> first group, by default, is the play-back group but this can be
>> overridden in the TV_CHANNELS list.
>>
>>   
>>> An example of video_groups in that setting would also help me a lot I think
>>>     
>>
>> I gave you one, but here is again, this time adjusted.
>>   
> 
> the reason I asked was because I got really confused when you threw in
> the DVB card too. I agree it is a reasonable scenario, I was just
> wondering how you propose to describe that.

Almost the same, just that group_type changes to dvb (I think) and
record_group are both set to none. I don't know anything about DVB as I
don't have or use them but I know it's possible as dischi uses dvb.

> 
>>   VideoGroup(vdev = '/dev/video0',
>>     vvbi = '/dev/vbi0',
>>     adev = '/dev/adsp',
>>     input_type = 'tuner',
>>     input_num = 0,
>>     tuner_norm = CONF.tv,
>>     tuner_chanlist = CONF.chanlist,
>>     desc = 'PVR-500 Play (2nd Record) Group',
>>     group_type = 'ivtv',
>>     record_group = 1),
>>   VideoGroup(vdev = '/dev/video1',
>>     vvbi = '/dev/vbi1',
>>     adev = '/dev/adsp',
>>     input_type = 'tuner',
>>     input_num = 0,
>>     tuner_norm = CONF.tv,
>>     tuner_chanlist = CONF.chanlist,
>>     desc = 'PVR-500 Record Group',
>>     group_type = 'ivtv',
>>     record_group = 0),
>>
>> VideoGroup[0] is the play-back group, the record_group points to
>> VideoGroup[1] and in this example it points back to the first group (At
>> the moment it would be None)
>>
>> Clearer?
>> Duncan

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users

Reply via email to