Michel Hoogervorst wrote:
> Ok, yesterday, I 'accidentally' spotted the freq.py file, and tried to
> put it in there.
> So I opened the freq.py, and put this in it:
>
> CHANLIST = {
> .....
> "nl-multikabel" : dict(PAL_MULTIKABEL),
> }
>
>
> And I declared the PAL_MULTIKABEL like this:
>
> PAL_MULTIKABEL = [
> ("10", 208000 ), # Nederland 1
> ("11", 216000 ), # Nederland 2
> ("12", 224000 ), # Nederland 3
> ("25", 504000 ), # RTL 4
> ("28", 528000 ), # RTL 5
> ("66", 832000 ), # MTV
> ]
>
>
> After that, I edited the freevo.conf and changed the chanlist from
> europe-west to nl-multikabel.
> Next, in local_conf.py I edited the TV_CHANNELS, to use channel numbers
> instead of names pointing to the items in FREQUENCY_TABLE, and I
> commented out the FREQUENCY_TABLE list. So now it looks like this:
>
> TV_CHANNELS = [
> ('1.tvgids.nl <http://1.tvgids.nl>', 'Nederland 1', '10'),
> ('2.tvgids.nl <http://2.tvgids.nl>', 'Nederland 2', '11'),
> (' 3.tvgids.nl <http://3.tvgids.nl>', 'Nederland 3', '12'),
> ('4.tvgids.nl <http://4.tvgids.nl>', 'RTL 4', '25'),
> ('5.tvgids.nl <http://5.tvgids.nl>', 'RTL 5', '28'),
> ('25.tvgids.nl <http://25.tvgids.nl>', 'MTV', '66'),
> ]
>
> ...AND IT WORKS!! Frequencies with mplayer!! :-D
>
>
> So, now my next project is to enable the record server to see if it
> works with mencoder as well. :-)
Cool, when you have finished may you would like to make a patch and add
it to the tracker.
Duncan
>
>
> 2007/1/3, Michel Hoogervorst <[EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>>:
>
> Hi,
>
> I would like to know if it is possible to use frequencies instead of
> channels with TV on a framebuffer.
> When I manually type 'mplayer tv:// -tv driver=v4l2:freq=208'
> everything works, but how to set this in my Freevo configuration?
>
> According to the Wiki it's not possible for watching, and there's a
> hack provided for recording with mencoder, but since that
> information is already nearly 2 years old, I hoped there was a
> solution for this in the meantime?
>
> The FREQUENCY_TABLE thing in local_conf doesn't work because Mpayer
> doesn't like using both a channel and a frequency.
>
>
>
> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Freevo-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
