On Tuesday 17 July 2007 18:24, F V wrote:
> Hi.
>
> I never managed to resolved this issue.
> I use tvtime as tv plugin; I use PAL and I'm living in italy.
> Normally my stationlist.xml use the Custom "band", defined with mhz
> like 663.50mhz; this file contains two frequencies, one for tvtime
> stand alone and one for tvtime "freevo" when launched from freevo.
> the problem is that freevo sometimes overwrites that file specifing
> "band=us-cable" for every channels and then nothing works; I've ever
> to change the file with a backup copy.
>
> there is any solution?
>
> thanks
yes a hack, I made the directory with the stationlist.xml read only
--
A programmer is a person who passes as an exacting expert on the basis of
being able to turn out, after innumerable punching, an infinite series of
incomprehensible answers calculated with micrometric precisions from vague
assumptions based on debatable figures taken from inconclusive documents
and carried out on instruments of problematical accuracy by persons of
dubious reliability and questionable mentality for the avowed purpose of
annoying and confounding a hopelessly defenseless department that was
unfortunate enough to ask for the information in the first place.
-- IEEE Grid newsmagazine
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
