Duncan Webb a écrit : > Pascal Schirrmann wrote: > >> >> Next Channel, Composite entry , PAL format : >> Driver: ivtv >> Card: Hauppauge WinTV PVR-150 >> Version: 256.00 >> Capabilities: 0x01030051 >> Enumerating supported Standards. >> 0: 0xf PAL-BGH >> 1: 0xe0 PAL-DK >> 2: 0x10 PAL-I >> 3: 0x100 PAL-M >> 4: 0x200 PAL-N >> 5: 0x400 PAL-Nc >> 6: 0xd0000 SECAM-BGH >> 7: 0x320000 SECAM-DK >> 8: 0x400000 SECAM-L >> 9: 0x800000 SECAM-L' >> 10: 0x1000 NTSC-M >> 11: 0x2000 NTSC-J >> 12: 0x8000 NTSC-K >> Current Standard is: 0xff0000 >> Enumerating supported Inputs. >> 0: Tuner 1 >> 1: S-Video 1 >> 2: Composite 1 >> 3: S-Video 2 >> 4: Composite 2 >> Input: 2 >> Width: 720, Height: 576 >> Read Frequency: 2692 >> CODEC::aspect: 2 >> CODEC::audio_bitmask: 0x69 >> CODEC::bframes: 3 >> CODEC::bitrate_mode: 0 >> CODEC::bitrate: 4500000 >> CODEC::bitrate_peak: 6000000 >> CODEC::dnr_mode: 3 >> CODEC::dnr_spatial: 0 >> CODEC::dnr_temporal: 0 >> CODEC::dnr_type: 0 >> CODEC::framerate: 0 >> CODEC::framespergop: 12 >> CODEC::gop_closure: 1 >> CODEC::pulldown: 0 >> CODEC::stream_type: 10 >> XXX:tunerSetFreq(chan='21', isplayer=True, app=None, app_cmd=None) >> Cannot set frequency for Composite 1/PAL/21: [Errno 16] Device or >> resource busy >> > > A bit strange that it says PAL as "Current Standard is: 0xff0000" is > SECAM, are you sure that you channel 21 has the correct video group in > TV_VIDEO_GROUPS? > > Reading your answer, I did a little further (strange how fast I can forget the reason of a configuration step, as soon as this works :-) In fact, in this case, this is the Composite entry. So I don't need the tuner. I tried in my TV_VIDEO_GROUP to set tuner_type='external' an to remove the channel value. This doesn't work, the system tell me that it cannot found the channel '' in the conf. So i put back 21 as channel number (that was the value, I don't remember why) and tried again. This time, no error message, but probably because I set tuner_type as external, the input stays on SECAM (SECAM is my default value) So, I went back to remove the tuner type, let the channel number to 21 and I can select (directly from freevo, not moving from preset to preset with the 'C' and 'V' keys) my composite entry in PAL. I suppose I'm one of the first trying to actually use different standards on this king of card. I remember some months ago a guy living in Russia with such kind of trouble, but don't remember the kind of TV card.
For your initial question, it seems that the Current Standard information is displayed before freevo actually set it, because I just tested, I started on my composite entry, the message is the same 0xff0000 and the input is actually set on PAL Still diving, Pascal ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Freevo-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freevo-users
