Johan Lans skrev:
> Duncan Webb skrev:
>   
>> Johan Lans wrote:
>>   
>>     
>>> Hi
>>>  I'm having a number of problems setting up freevo on my gentoo box, and 
>>> I would be happy with help on any one of them.
>>>
>>> I have both uvesa and svgalib setup, and they work fine since mplayer 
>>> can use them to play videos. Due to problems with flickering subtitles 
>>> when using mplayer in framebuffer mode, I also setup X.
>>>
>>> freevo version is 1.7.2
>>> pygame version is 1.7.1
>>> I'm using a geforce2 with svga-out.
>>>
>>> First problem: Cannot start freevo as nonroot user. I'm getting 
>>> different errors depending on how I try to start freevo:
>>>
>>>  From console:
>>> Using fbdev:
>>>   File "/usr/lib/python2.4/site-packages/freevo/osd.py", line 377, in 
>>> __init__
>>>     self.screen = pygame.display.set_mode((self.width, self.height))
>>> pygame.error: Unable to set terminal attributes
>>>
>>> Using directfb:
>>>   File "/usr/lib/python2.4/site-packages/freevo/osd.py", line 364, in 
>>> __init__
>>>     pygame.display.init()
>>> pygame.error: DirectFBCreate: Initialization error!
>>>
>>> Using svgalib:
>>>   File "/usr/lib/python2.4/site-packages/freevo/osd.py", line 377, in 
>>> __init__
>>>     self.screen = pygame.display.set_mode((self.width, self.height))
>>> pygame.error: Unable to set terminal attributes
>>>
>>>  From X:
>>> Using x11:
>>>   File "/usr/lib/python2.4/site-packages/freevo/osd.py", line 364, in 
>>> __init__
>>>     pygame.display.init()
>>> pygame.error: No available video device
>>>
>>>
>>> Second problem: When running as root I can start freevo using all 
>>> framebuffer modes from console, but from X I can only start using svga 
>>> and directfb:
>>>
>>>  From X:
>>>
>>> Using fbdev:
>>>   File "/usr/lib/python2.4/site-packages/freevo/osd.py", line 364, in 
>>> __init__
>>>     pygame.display.init()
>>> pygame.error: No available video device
>>>
>>> Using x11:
>>>   File "/usr/lib/python2.4/site-packages/freevo/osd.py", line 364, in 
>>> __init__
>>>     pygame.display.init()
>>> pygame.error: No available video device
>>>
>>> I would be very thankful for any ideas on what could be causing these 
>>> errors. I have googled, but haven't found anything. Also, if somebody 
>>> knows how to get rid of flickering subtitles in mplayer, I would be 
>>> grateful.
>>>     
>>>       
>> What does fbset -i say and what is in your freevo.conf?
>>
>> Just tried this on my gentoo system using uvesafb and it worked first
>> time. Even though the freevo.conf is not 100% correct as it has display=x11.
>>
>> Normally, the console runs at 1280x1024-85 but when freevo is running it
>> has this:
>>
>> fbset -i
>>
>> mode "800x600-85"
>>     # D: 56.715 MHz, H: 53.606 kHz, V: 85.089 Hz
>>     geometry 800 600 800 600 32
>>     timings 17632 129 45 26 1 84 3
>>     vsync high
>>     rgba 8/16,8/8,8/0,8/24
>> endmode
>>
>> Frame buffer device information:
>>     Name        : VESA VGA
>>     Address     : 0xd0000000
>>     Size        : 8060928
>>     Type        : PACKED PIXELS
>>     Visual      : TRUECOLOR
>>     XPanStep    : 0
>>     YPanStep    : 0
>>     YWrapStep   : 0
>>     LineLength  : 3200
>>     Accelerator : No
>>
>> The V: 85.089 Hz should be high enough to stop flickering.
>>
>> Root has access to all the devices, which non-root users do not unless
>> specifically given permission. The devices below should be accessible to
>> be read and written by non-root users.
>>
>> lsof | egrep '(^python|^freevo)' | grep '/dev'
>> freevo    24255 root    0u CHR        4,1  230 /dev/tty1
>> freevo    24255 root    1u CHR        4,1  230 /dev/tty1
>> freevo    24255 root    2u CHR        4,1  230 /dev/tty1
>> python    24257 root  mem  CHR       29,0  575 /dev/fb/0
>> python    24257 root    0u CHR        4,1  230 /dev/tty1
>> python    24257 root    1u CHR        4,1  230 /dev/tty1
>> python    24257 root    2u CHR        4,1  230 /dev/tty1
>> python    24257 root    3r CHR       14,0 7799 /dev/sound/mixer
>> python    24257 root    9u CHR       29,0  575 /dev/fb/0
>> python    24257 root   10u CHR        4,7 2940 /dev/tty7
>> python    24257 root   11u CHR      13,63  958 /dev/input/mice
>>
>> This is the same command running freevo on a system with a Matrox card
>> and directfb.
>>
>> python    5116 root    0u CHR     5,1         4166 /dev/console
>> freevo    5733 root    0u CHR     4,1         5919 /dev/tty1
>> freevo    5733 root    1u CHR     4,1         5919 /dev/tty1
>> freevo    5733 root    2u CHR     4,1         5919 /dev/tty1
>> python    5735 root  mem  CHR   252,0         3600 /dev/fusion0
>> python    5735 root  mem  REG    0,14  32768 15604 /dev/shm/fusion.0.0
>> python    5735 root  mem  REG    0,14  53248 15605 /dev/shm/fusion.0.1
>> python    5735 root  mem  REG    0,14 409600 15606 /dev/shm/fusion.0.2
>> python    5735 root  mem  CHR    29,0         3649 /dev/fb0
>> python    5735 root    0u CHR     4,1         5919 /dev/tty1
>> python    5735 root    1u CHR     4,1         5919 /dev/tty1
>> python    5735 root    2u CHR     4,1         5919 /dev/tty1
>> python    5735 root    3u CHR    14,0         4083 /dev/mixer
>> python    5735 root    9u CHR   252,0         3600 /dev/fusion0
>> python    5735 root   10u REG    0,14  32768 15604 /dev/shm/fusion.0.0
>> python    5735 root   11u REG    0,14  53248 15605 /dev/shm/fusion.0.1
>> python    5735 root   12u REG    0,14 409600 15606 /dev/shm/fusion.0.2
>> python    5735 root   13u CHR    29,0         3649 /dev/fb0
>> python    5735 root   14r CHR     4,0         5914 /dev/tty0
>> python    5735 root   15u CHR     4,7         6282 /dev/tty7
>> python    5735 root   16u CHR   13,63         3771 /dev/input/mice
>>
>> I would recommend that you concentrate on one problem at a time, first
>> get it working as root and the X server.
>>
>> More than likely is that there is a problem with the framebuffer, it
>> looks like it canot be access by two processes at the same time. Try
>> installing dev-libs/linux-fusion, dev-libs/DirectFB and
>> dev-libs/DirectFB-extra to see it this works.
>>
>> Duncan
>>
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by: Microsoft
>> Defy all challenges. Microsoft(R) Visual Studio 2005.
>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>> _______________________________________________
>> Freevo-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/freevo-users
>>
>>   
>>     
> Hi
> Thanks for the long answer! I really wouldn't be surprised if there was
> something wrong with the framebuffer setup. I really don't know anything
> about the fb, so I've been kinda fumbling in the dark. I followed
> http://dev.gentoo.org/~spock/projects/uvesafb/ when setting it up, but I
> really don't know much about whats the setup does or how to check that
> it works properly.
>
> Anyways, here's what I've done now:
>
> I've emerged lsof, fbset, linux-fusion DirectFB and DirectFB-extra.
> fbset -i gives:
>
> mode "640x480-60"
>     # D: 23.845 MHz, H: 29.844 kHz, V: 60.048 Hz
>     geometry 640 480 640 3000 16
>     timings 41937 80 16 13 1 63 3
>     vsync high
>     rgba 5/11,6/5,5/0,0/0
> endmode
>
> Frame buffer device information:
>     Name        : VESA VGA
>     Address     : 0xc8000000
>     Size        : 3840000
>     Type        : PACKED PIXELS
>     Visual      : TRUECOLOR
>     XPanStep    : 0
>     YPanStep    : 1
>     YWrapStep   : 1
>     LineLength  : 1280
>     Accelerator : No
>
> The reason I'm running at [EMAIL PROTECTED] is that I'm using the TV as 
> screen.
> I tried chmod 666 of all the files listed in lsof | egrep
> '(^python|^freevo)' | grep '/dev'
>
> The last step has given me one change. If I log in as root and start
> freevo with directfb and list all of them devices and chmod 666 them,
> then I can log in as nonroot and start freevo from console with
> directfb. However, when I try to shut down freevo or play a movie, the
> whole system hangs with a black screen and I have to restart the whole
> thing.
>
> Well, ok. I can live without framebuffer support. So i thought, let's
> start up the system without it, and let's see if freevo starts with x11.
> But that didn't work either. The same error message as before, both as
> root and non-root.
>
> This is making me very confused...
>
> oh, my freevo.conf, the one that works in X and root is:
>
> ellen ~ # cat /etc/freevo/freevo.conf
> chanlist = us-cable
> display = directfb
> fbxine = /usr/bin/fbxine
> geometry = 640x480
> jpegtran = /usr/bin/jpegtran
> lsdvd = /usr/bin/lsdvd
> mplayer = /usr/bin/mplayer
> renice = /usr/bin/renice
> setterm = /usr/bin/setterm
> tv = pal
> version = 2.1
>
>
> /Johan
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Freevo-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
>   

Ok, I'm answering my own post since I solved it with the help of the 
gentoo support forums. Seems I hadn't emerged SDL with X enabled (since 
I started out wanting to run the whole thing from framebuffer). Emerging 
libsdl and sdl-ttf with the X use flag enabled solved the problem with 
running freevo with x11 display.


Thanks a lot for the help

/Johan

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users

Reply via email to