Is it possible to use the USB-Irda Dongle to recieve signals from an apple
IR-Controller in freevo?
> lsusb
...
Bus 001 Device 003: ID 9710:7780 MosChip Semiconductor
...
Found some howtos to install the dongle on my Debian 4.0 (2.6.18-5)
> irattach /dev/ircomm0 -s
or
> irattach /dev/ttyS0 -s
> irdadump
runs, hope so? When i connect some cellphones with an ir device, they have
been recognized.
Followed the documentation to use lirc, but it does not work.
lircd --driver=help does not list the driver.
> lsmod | grep mcs
mcs7780 11492 0
irda 162588 6
irtty_sir,sir_dev,ircomm_tty,ircomm,irda_usb,mcs7780
crc_ccitt 2240 2 mcs7780,irda
usbcore 112644 5 irda_usb,mcs7780,ehci_hcd,ohci_hcd
tested all avaible drivers on both devices -> irrecord: could not init
hardware
> irrecord -H $1 -d /dev/ttyS0 lircd.conf
Christian Stern
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
