Dirk Meyer said the following, on 15/02/2008 14:57: > Ignacio Quezada wrote: > >> Hi!, >> >> I've bought a new Microsoft's Remote MCE and I'm trying to control >> volume. I'm using alsa and not oss, but the plugin desactives when I >> open freevo. It says that /dev/mixer does not exist. >>
You need the alsa oss modules loaded to the oss mixer device to be created. these modules: snd_pcm_oss, snd_mixer_oss >> Also, I tried to control MPlayer's volume, but something strange happen. >> I'm using IEC958 and I can't control it with any mixer. I tried >> alsamixer and I can't control the volume even with Master, just mute the >> IEC958. >> >> I'm lost. I'm trying to set softvol to mplayer and put a initial volume >> but does not work fine. An initial volume around 50% of 100% without >> external gain like softvol-max. >> >> What did you if you are using alsa ? >> > > If you use pass-thru for digital output you may not be able to control > the volume at all. It is just passed to the stereo. I have the same > setup and can not control the auto with Freevo. Does alsamixer work > for you? > IIRC some of the MCE remotes can be re-programmed so that certain buttons can be programmed for different codes, failing that you can use the irsend function of lirc to transmit IR commands to a device but the sensors have to be really near ~3cm. Duncan ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Freevo-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freevo-users
