>> I just tried, and I didn't see any noticeable improvement. >> the symptoms in my case is that the movie (1920x1080 h264) starts to >> play smooth, but after a minute or two the coreavc codec starts to get >> choked and I begin to see many small freezes. >> >> My setup is Pentium D 3ghz with GT 8600. >> video card is not relevant here because the bottleneck is decoding, and >> since nvidia drivers for linux does not support pure video (hardware >> assisted h264 decoding). >> >> > Have you looked at the output of top or htop while running your tests? > Nope, I was busy looking at the video output looking for freezes. I can tell you that generally while I play an 1080p h264, my system is at near 100% on both cores, and that I see freevo takes what appears to be 1-2% of one core every few seconds.
------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Freevo-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freevo-users
