RE: no vsd commands available via telnet!?

[Tim Sellar]

Sounds like your path does not include /usr/sbin. What is the ouput from the 'echo $PATH' command? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: 29 May 2001 14:35 To: [EMAIL PROTECTED] Subject: Re: no vsd commands available via telnet!? hi tim, when i go via telnet to /usr/sbin and type ./rebootvs then it works....   ----- Original Message ----- From: Tim Sellar To: [EMAIL PROTECTED] Sent: Tuesday, May 29, 2001 11:17 AM Subject: RE: no vsd commands available via telnet!? A couple of possiblities:   You are not logging in as admin? (in which case /usr/sbin, where rebootvs resides, will not be accessible)   Your skel was incorrectly built (should have seen errors during skel generation)   Your virtual server was incorrectly built (should have seen errors during virtual server creation)...   With regard to priviliges, try the vsdadm priv_modify command on the hosting server, or if you are root within the virtual server manually edit the /etc/vsd/priv file.   If you want vsd commands available within your virtual servers, install freeVSD from source within the VS, or incorporate it into your skel... -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: 28 May 2001 16:13 To: [EMAIL PROTECTED] Subject: no vsd commands available via telnet!? hi tim, when i connect virtual sever or host server via telnet normally (without 1725) there are no vsd commands available.(rebootvs etc.....) how to set privileges???? ----- Original Message ----- From: Tim Sellar To: [EMAIL PROTECTED] Sent: Monday, May 28, 2001 1:18 PM Subject: RE: how to administrate virtual server via telnet? If you connect to port 1725 on the hosting server you are connecting directly to the VSD service defined in /etc/inetd.conf. This is not the way to administer VSD servers. You should connect to your virtual server via telnet (do not specify a specific port) and login. You may then manage your virtual server via the command line in the usual manner. Altrenatively read the enclosed doucmentation to see how to use vsdadm and the collection of modules supplied...   Tim  -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Nikolaus Franz Sent: 28 May 2001 07:41 To: [EMAIL PROTECTED] Subject: how to administrate virtual server via telnet? hello, what is the way to administrate virtual servers via telnet?   telnet with port 1725 gives after some seconds "++OK FreeVSD server...." the message: "ERR connection closed"   this happened by connection over host and by connection over virtual server, why?   thank you niko