Re: how to add an ip based VirtualHost to a VIRTUAL SERVER?????

[Nikolaus Franz]

hello,   i change / add   Port 80          (.....before 8080) Listen 62.146.42.18:8080 Listen 62.146.42.25:8080 <IfDefine SSL> Listen 62.146.42.18:8443 </IfDefine>     <VirtualHost 62.146.42.25:8080> ServerName 62.146.42.25 DocumentRoot /www/vhtdocs/medverzeichnis <Location /www/vhtdocs/medverzeichnis> </Location> </VirtualHost>   then it works(with the right homedirectory) when i point in browser to 62.146.42.25:8080 (but without 8080 nothing happens)   when i add in /etc/rc the line vsdredirect 62.146.42.25:80:8080 then it works in browser with only the ip (no 8080)-----BUT with the wrong homedirectory /home/httpd/docs and not www/vhtdocs/medverzeichnis,   i am really confused..   greeting niko     ----- Original Message ----- From: Tim Sellar To: [EMAIL PROTECTED] Sent: Tuesday, June 19, 2001 7:40 PM Subject: RE: how to add an ip based VirtualHost to a VIRTUAL SERVER????? Have you got entries like this in /etc/httpd/conf/httpd.conf for both your ip addresses?   Port 80 Listen 62.8.10.7:8080 <IfDefine SSL> Listen 62.8.10.7:8443 </IfDefine>   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Nikolaus Franz Sent: 18 June 2001 14:56 To: [EMAIL PROTECTED] Subject: Re: how to add an ip based VirtualHost to a VIRTUAL SERVER????? yes telnet point to the right VirtualServer! ----- Original Message ----- From: Tim Sellar To: [EMAIL PROTECTED] Sent: Monday, June 18, 2001 3:52 PM Subject: RE: how to add an ip based VirtualHost to a VIRTUAL SERVER????? When you telnet to the address 62.146.42.25 do you correctly connect to your virtual server? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Nikolaus Franz Sent: 18 June 2001 09:58 To: [EMAIL PROTECTED] Subject: Re: how to add an ip based VirtualHost to a VIRTUAL SERVER????? it dont work, please have a look to ifconfig and route results.   this is the result from ifconfig:   eth0:2     Linkverkapselung:Ethernet  HWaddr 00:01:02:20:FE:AB            inet addr:62.146.42.25  Bcast:62.255.255.255  Maske:255.255.255.255           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           Unterbrechung:9 Basisadresse:0x2400   this is the result of route:   Kernel IP Routentabelle Ziel            Router          Genmask         Flags Metric Ref    Use Iface 62.146.42.25    62.146.42.25    255.255.255.255 UGH   0      0        0 eth0   i am not sure if this is correct, if not please send how to correct.   many thanks niko     ----- Original Message ----- From: Tim Sellar To: [EMAIL PROTECTED] Sent: Monday, June 18, 2001 10:43 AM Subject: RE: how to add an ip based VirtualHost to a VIRTUAL SERVER????? Probably vsdredirect is failing to set up a redirection for your ip-aliases. Try specifying port 8080 in your browser, ie lynx 62.146.42.25:8080 and you should see your website. If you do, there are two solutions. Add a couple more vsdredirect lines into /etc/rc which explicitly specify the new ip address and reboot the vs, or (when we have finally got it sorted) move to RH7.1 and use iptable redirection instead.   Tim -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Nikolaus Franz Sent: 18 June 2001 00:34 To: [EMAIL PROTECTED] Subject: how to add an ip based VirtualHost to a VIRTUAL SERVER????? hi, i add an virtual ip to the network device ......eth0:4 i add with..... vsdadm vs_addipalias the IP to a VIRTUAL SERVER i config the httpd.conf file:   <VirtualHost 62.146.42.25> ServerName medverzeichnis.de DocumentRoot /www/vhtdocs/medverzeichnis <Location /www/vhtdocs/medverzeichnis> </Location> </VirtualHost>   but i get no connection via browser, ....what is wrong????   thank you niko