Hi again,
I don't know more what to do....I did everything as you told me and the
things still now working....I still get the Mount error....what should I do?
Thank you.
Guilherme
----- Original Message -----
From: "Damion Parry" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 26, 2001 11:37 AM
Subject: Re: VS creation problems.
> Hello,
>
> It appears that you have tried to use a pre-generated skel and untarred
> it in the wrong directory? To clean up I would create another directory,
> say skel_repair and move the following directories in to the new
> directory:
>
> > mv bin dev etc home lib proc tmp usr skel_repair
>
> this will leave you with a /home/vsd/skel directory like:
>
> brasil
> master
> oponto
> oponto-inglaterra
> skel
> skel_repair
> teste
>
> With each directory being an individula skel. I would then register any
> of the skels you wish to use (and remove the others, they take up a lot
> of disk space).
>
> > vsdadm part_skeladd brasil 0
> ...
>
> I would then remove any /tmp/vsd.* files that you may have, this will
> clear away anyway other tasks that you may have scheduled. I'd then
> re-create you're virtual server:
>
> vsdadm vs_create server1.oponto.com.br vsone .....
>
> If you leave the skel argument off of the end then the vs will be linked
> to the brazil skel as this is the one set as default, and run
> vsd-vsbatch.pl. That should do it.
>
> If you have anyother problems, please let me know.
> Damion.
>
>
> Guilherme wrote:
> >
> > Hello Damion,
> > I really don't know what is happening....I checked everything that you
said
> > and everything is right!
> > Here is the ls -l * of the /home/vsd directory:
> > skel:
> > total 56
> > drwxr-xr-x 2 root root 4096 Jun 23 16:03 bin
> > drwxr-xr-x 11 root root 4096 Jun 25 20:20 brasil
> > drwxr-xr-x 2 root root 4096 Mar 5 09:17 dev
> > drwxr-xr-x 10 root root 4096 Jun 23 16:03 etc
> > drwxr-xr-x 4 root root 4096 Jun 23 16:03 home
> > drwxr-xr-x 3 root root 4096 Jun 23 16:03 lib
> > drwxr-xr-x 11 root root 4096 Jun 24 18:28 master
> > drwxr-xr-x 11 root root 4096 Jun 23 18:30 oponto
> > drwxr-xr-x 11 root root 4096 Jun 23 19:30
oponto-inglaterra
> > drwxr-xr-x 2 root root 4096 Mar 5 09:17 proc
> > drwxr-xr-x 11 root root 4096 Mar 5 09:23 skel
> > drwxr-xr-x 11 root root 4096 Jun 23 20:53 teste
> > drwxr-xr-x 2 root root 4096 Mar 5 09:17 tmp
> > drwxr-xr-x 4 root root 4096 Jun 23 16:04 usr
> >
> > vs:
> > total 0
> > lrwxrwxrwx 1 root root 1 Jun 23 18:36
> > server1.oponto.com.br ->
> > /
> > -------------------------*----------------------------
> > � Here is a copy of my vsd.conf file:
> > # /etc/vsd.conf - FreeVSD configuration file
> > # This file is automatically generated
> >
> > <Global>
> > UIDRange 1000 60000
> > UIDAllocChunk 100
> > PrimaryNS 209.61.182.53
> > SecondaryNS 209.61.173.63
> > Skel brasil
> > ErrorLog /var/log/vsd.log
> > BWBurst 0bps
> > BWLimit 0bps
> > </Global>
> >
> > <Partition 0>
> > # Mount point of disk device
> > Mount /home/vsd
> > # Maximum number of virtual servers
> > MaxVS 10
> > Skel skel
> > Skel master
> > Skel brasil
> > </Partition>
> >
> > # Virtual server account details
> > <VirtualServer server1.oponto.com.br>
> > IP 209.61.182.53
> > StartUID 0
> > Users 0
> > Status active
> > Quota 0
> > Skel
> > Partition 0
> > HostingServer
> > PrimaryNS 209.61.182.53
> > SecondaryNS 209.61.173.63
> > </VirtualServer>
> >
> > *************************---*************************
> > I hope that this all help us to get a solution....
> > Thank you for your attention.
> >
> > Guilherme
> >
> > ----- Original Message -----
> > From: "Damion Parry" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Tuesday, June 26, 2001 5:42 AM
> > Subject: Re: VS creation problems.
> >
> > > Can I just check a few things?
> > >
> > > After you ran vsd-install.pl (accepting all defaults?), you ran
> > > vsd-genskel.pl, and gave the default answers to each of the questions?
> > >
> > > In which case, at /home/vsd/skel you will have a directory called
> > > default. You then executed:
> > >
> > > > vsdadm part_skeladd <name of your machine> default 0
> > >
> > > Where "default" is the name given to the skel, and "0" is the number
of
> > > the partition that this skel is on. Did you then set the skel as
global?
> > >
> > > > vsdadm part_setskelglobal <name of your machine> default
> > >
> > > It doesn't matter if you didn't, its just without this command you
would
> > > need to specify the skel name when creating a virtual server.
> > >
> > > The fact that vsd-vsbatch.pl is coming back with a 'can't process
> > > mountpoint' error suggests to me that there is something wrong with
the
> > > partition/skel sections of you're vsd.conf file. You should have a
> > > section like:
> > >
> > > <Partition 0>
> > > Mount /home/vsd
> > > MaxVS 40
> > > Skel default
> > > </Partition>
> > >
> > > Which will relate to a /home/vsd/skel/default directory for you're
skel.
> > > You then created you're virtual server:
> > >
> > > >vsdadm vs_create <name of you're machine> vsone 192.192.192.10
vsone.fqdn
> > 300 300 default
> > >
> > > where vsone is the name of the virtual server, 192.192.192.10 is the
ip
> > > address, vsone.fqdn is the fully qualified domain name, 300 is the
> > > quota, 300 is the number of users, and default is the name of the skel
> > > you just created. You now run vsd-vsbatch.pl and it falls over with
> > > "cannot process mount point ''".
> > >
> > > If all of this is correct, then I'm stumped. If you could send me an
`ls
> > > -l *` of you're home/vsd directory, and a copy of you're vsd.conf
> > > (/etc/vsd from rpm install) file, I'll have a look further.
> > >
> > > My apologies if all of this is a bit too basic, I just want to rule
out
> > > the most common possibilities.
> > >
> > > Damion.
> > >
> > > Guilherme wrote:
> > > >
> > > > Hello guys,
> > > > how are you?
> > > > I am sorry for been writing again....but I am counting the
minutes
> > to
> > > > get freeVSD running!
> > > > =)
> > > > But unfortunately I got some problems....I fixed the
kernel-headers
> > > > thing, and now I am able to create skels perfectly, but, when I use
the
> > > > command "vs_create" (with all the complete and correct syntax), and
> > after
> > > > that try to use "vs_vsdbatch.pl" , I still get the error saying
that:
> > > > Couldn't process : mount point `' does not exist
> > > > ---*---
> > > > Please, try to help me AGAIN with this issue.....
> > > > Thank you very much, sirs.
> > > > Regards,
> > > >
> > > > Guilherme
> > > >
> > > > ----- Original Message -----
> > > > From: "Damion Parry" <[EMAIL PROTECTED]>
> > > > To: <[EMAIL PROTECTED]>
> > > > Sent: Monday, June 25, 2001 9:47 AM
> > > > Subject: Re: VS creation problems.
> > > >
> > > > > > I upgraded the RPM as you just told me to do....and I still have
on
> > > > problem when I try to create skels:
> > > > > > error: failed dependencies:
> > > > > > kernel-headers is needed by glibc-devel-2.1.3-15
> > > > > > kernel-headers >= 2.2.1 is needed by
glibc-devel-2.1.3-15
> > > > > > p1-1
> > > > > > -- deleting extra files
> > > > > > -----------*------------
> > > > > > I don't understand why this is happening, because our glibc
is
> > newer
> > > > than 2.1.3-15 (our is 2.1.3-22).
> > > > > > I think that we are getting closer of a solution....and I am
> > waiting
> > > > your answer.
> > > > > > Thank you .
> > > > > >
> > > > > > Guilherme
> > > > >
> > > > > Hello,
> > > > >
> > > > > This looks like you haven't got the kernel-headers rpm installed
on
> > > > > you're system When you installed the machine did you do a standard
> > > > > server install or a custom install?
> > > > >
> > > > > If you did a custom install you may have missed out a few things,
in
> > > > > which case I would highly recommend downlaoding a pre-generated
skel
> > > > > from the freevsd.org ftp site.
> > > > >
> > > > > Damion.
> > > > > ------------------------- The freeVSD Support
> > > > List --------------------------
> > > > > Subscribe:
> > mailto:[EMAIL PROTECTED]?body=subscribe%20freevsd-support
> > > > > Unsubscribe:
> > > > mailto:[EMAIL PROTECTED]?body=unsubscribe%20freevsd-support
> > > > > Archives:
http://freevsd.org/support/mail-archives/freevsd-support
> > > >
> >
> --------------------------------------------------------------------------
> > > > ---
> > > >
> > > > _________________________________________________________
> > > > Do You Yahoo!?
> > > > Get your free @yahoo.com address at http://mail.yahoo.com
> > > >
> > > > ------------------------- The freeVSD Support
> > List --------------------------
> > > > Subscribe:
> > mailto:[EMAIL PROTECTED]?body=subscribe%20freevsd-support
> > > > Unsubscribe:
> > mailto:[EMAIL PROTECTED]?body=unsubscribe%20freevsd-support
> > > > Archives:
http://freevsd.org/support/mail-archives/freevsd-support
> > >
> >
> --------------------------------------------------------------------------
> > ---
> > > ------------------------- The freeVSD Support
> > List --------------------------
> > > Subscribe:
mailto:[EMAIL PROTECTED]?body=subscribe%20freevsd-support
> > > Unsubscribe:
> > mailto:[EMAIL PROTECTED]?body=unsubscribe%20freevsd-support
> > > Archives: http://freevsd.org/support/mail-archives/freevsd-support
> >
> --------------------------------------------------------------------------
> > ---
> >
> > _________________________________________________________
> > Do You Yahoo!?
> > Get your free @yahoo.com address at http://mail.yahoo.com
> >
> > ------------------------- The freeVSD Support
List --------------------------
> > Subscribe:
mailto:[EMAIL PROTECTED]?body=subscribe%20freevsd-support
> > Unsubscribe:
mailto:[EMAIL PROTECTED]?body=unsubscribe%20freevsd-support
> > Archives: http://freevsd.org/support/mail-archives/freevsd-support
>
> --------------------------------------------------------------------------
---
> ------------------------- The freeVSD Support
List --------------------------
> Subscribe: mailto:[EMAIL PROTECTED]?body=subscribe%20freevsd-support
> Unsubscribe:
mailto:[EMAIL PROTECTED]?body=unsubscribe%20freevsd-support
> Archives: http://freevsd.org/support/mail-archives/freevsd-support
> --------------------------------------------------------------------------
---
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
------------------------- The freeVSD Support List --------------------------
Subscribe: mailto:[EMAIL PROTECTED]?body=subscribe%20freevsd-support
Unsubscribe: mailto:[EMAIL PROTECTED]?body=unsubscribe%20freevsd-support
Archives: http://freevsd.org/support/mail-archives/freevsd-support
-----------------------------------------------------------------------------
