Hi, Here is the serial console output, mayby someone has an idea about that? --------------- cut - here ---------------------------------------
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: 一 9月 12 17:36:00 CST 2005 ([EMAIL PROTECTED])
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
No DPN
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.37.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29007: 200MHz
Total memory: 16384 KBytes
Total memory used by CFE: 0x80300000 - 0x803A3660 (669280)
Initialized Data: 0x80339570 - 0x8033BC80 (10000)
BSS Area: 0x8033BC80 - 0x8033D660 (6624)
Local Heap: 0x8033D660 - 0x803A1660 (409600)
Stack Area: 0x803A1660 - 0x803A3660 (8192)
Text (code) segment: 0x80300000 - 0x80339570 (234864)
Boot area (physical): 0x003A4000 - 0x003E4000
Relocation Factor: I:00000000 - D:00000000
Boot version: v3.6
The boot is CFE
mac_init(): Find mac [00:14:BF:8F:8E:88] in location 2
Nothing...
No eou key find
Device eth0: hwaddr 00-14-BF-8F-8E-88, ipaddr 192.168.1.1, mask
255.255.255.0
gateway not set, nameserver not set
Reading :: Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3732 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029007
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 4kB, 2-way, linesize 16 bytes.
Linux version 2.4.32 ([EMAIL PROTECTED]) (gcc version 3.4.4
(FreeWRT)) #2 Tue Jul 18 16:11:28 CEST 2006
Setting the PFC value as 0x15
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2
init=/etc/preinit noinitrd console=ttyS0,115200
CPU: BCM4712 rev 1 at 200 MHz
Using 100.000 MHz high precision timer.
Calibrating delay loop... 199.47 BogoMIPS
Memory: 14280k/16384k available (1411k kernel code, 2104k reserved, 100k
data, 80k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis
Communications AB.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
b44.c:v0.93 (Mar, 2004)
eth0: Broadcom 47xx 10/100BaseT Ethernet 00:14:bf:8f:8e:88
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Flash device: 0x400000 at 0x1c000000
bootloader size: 262144
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x003f0000 : "linux"
0x000bbc00-0x001a5000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary --
force read-only
0x003f0000-0x00400000 : "nvram"
0x001b0000-0x003f0000 : "data"
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
ip_conntrack version 2.1 (5953 buckets, 5953 max) - 360 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear <[EMAIL PROTECTED]>
All bugs added by David S. Miller <[email protected]>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 80k freed
Algorithmics/MIPS FPU Emulator v1.5
diag boardtype: 00000101
Probing device eth0: found!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
Press reset now to enter Failsafe for eth0!
Registering mini_fo version $Id: Makefile 258 2006-07-17 00:26:16Z tg $
Unlocking linux ...
jffs2 unusable; using ramdisk
creating directories... done
setting up symlinks... done
mount: Mounting /rom/sys on /sys failed: Invalid argument
init started: BusyBox v1.1.3 (2006.07.18-10:49+0000) multi-call binary
Please press Enter to activate this console. jffs2.bbc: SIZE compression
mode activated.
eth1: Broadcom BCM4320 802.11 Wireless Controller 3.90.37.0
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: 一 9月 12 17:36:00 CST 2005 ([EMAIL PROTECTED])
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
No DPN
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.37.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29007: 200MHz
Total memory: 16384 KBytes
Total memory used by CFE: 0x80300000 - 0x803A3660 (669280)
Initialized Data: 0x80339570 - 0x8033BC80 (10000)
BSS Area: 0x8033BC80 - 0x8033D660 (6624)
Local Heap: 0x8033D660 - 0x803A1660 (409600)
Stack Area: 0x803A1660 - 0x803A3660 (8192)
Text (code) segment: 0x80300000 - 0x80339570 (234864)
Boot area (physical): 0x003A4000 - 0x003E4000
Relocation Factor: I:00000000 - D:00000000
Boot version: v3.6
The boot is CFE
mac_init(): Find mac [00:14:BF:8F:8E:88] in location 2
Nothing...
No eou key find
Device eth0: hwaddr 00-14-BF-8F-8E-88, ipaddr 192.168.1.1, mask
255.255.255.0
gateway not set, nameserver not set
Reading ::
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: 一 9月 12 17:36:00 CST 2005 ([EMAIL PROTECTED])
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
No DPN
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.37.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29007: 200MHz
Total memory: 16384 KBytes
Total memory used by CFE: 0x80300000 - 0x803A3660 (669280)
Initialized Data: 0x80339570 - 0x8033BC80 (10000)
BSS Area: 0x8033BC80 - 0x8033D660 (6624)
Local Heap: 0x8033D660 - 0x803A1660 (409600)
Stack Area: 0x803A1660 - 0x803A3660 (8192)
Text (code) segment: 0x80300000 - 0x80339570 (234864)
Boot area (physical): 0x003A4000 - 0x003E4000
Relocation Factor: I:00000000 - D:00000000
Boot version: v3.6
The boot is CFE
mac_init(): Find mac [00:14:BF:8F:8E:88] in location 2
Nothing...
No eou key find
Device eth0: hwaddr 00-14-BF-8F-8E-88, ipaddr 192.168.1.1, mask
255.255.255.0
gateway not set, nameserver not set
Reading ::
--------------- cut - here ---------------------------------------
/Markus
signature.asc
Description: OpenPGP digital signature
_______________________________________________ freewrt-developers mailing list [email protected] https://www.freewrt.org/lists/listinfo/freewrt-developers
