On Tue, 2006-10-31 at 11:04 +0100, Dirk Nehring wrote: > ? Can you include a "set -x" into the wireless-broadcom script and post > the output? Which router model? > > Dirk
wrt54g v2.2. I've un-uncommented the wireless-country again to give
"better" results.
[EMAIL PROTECTED]:~# ifup -v eth1
run-parts /etc/network/if-pre-up.d
+ [ broadcom != broadcom ]
+ ip link set up dev eth1
+ wl radio on
+ wl monitor 0
+ wl macmode 0
+ wl mac none
+ wl up
+ cat /var/run/nas.lan.pid
+ pid=646
+ [ -n 646 -a -d /proc/646 ]
+ kill 646
+ brctl show
+ grep eth1
+ ifname=br0
+ [ FreeWRT ]
+ [ DE ]
+ {wl down
/etc/network/if-pre-up.d/wireless-broadcom:
/etc/network/if-pre-up.d/wireless-broadcom: 34: {wl: not found
+ wl country DE
Setting country code "DE"
eth1: Invalid argument
Setting country "DE" failed
country Select Country code for use with 802.11d
Use either long name or abbreviation from ISO 3166.
Use 'wl country list [band(a or b)]' for the list of supported
countries
+ wl up}
eth1: Operation not supported
var unrecognized name, type -h for help
+ [ ]
+ wl gmode
54g Mode is 54g Auto (1)
+ wl up}
eth1: Operation not supported
var unrecognized name, type -h for help
+ nas_auth=-A
+ wl ap 1
+ [ ]
+ [ ]
+ [ ]
+ [ 1 ]
+ wl channel 1
+ [ ]
+ [ ]
+ [ wpa-psk = open ]
+ [ wpa-psk = wep ]
+ crypto_num=4
+ wl wep off
+ wl tkip off
+ wl aes on
+ wl wsec 4
+ gtk_rekey=
+ gtk_rekey=
+ gtk_rekey=3600
+ [ wpa-psk = wpa-psk ]
+ wl eap off
+ auth=128
+ wl wpa_auth 128
+ [ ap = wds ]
+ + /usr/sbin/nas -P /var/run/nas.lan.pid -l br0 -H 34954 -i eth1 -A -m
128 -k -s FreeWRT -w 4 -g 3600
exit 0
run-parts /etc/network/if-up.d
[EMAIL PROTECTED]:~# eth1: ignore i/f due to error(s)
--
Lothar Gesslein <[EMAIL PROTECTED]>
signature.asc
Description: This is a digitally signed message part
_______________________________________________ freewrt-developers mailing list [email protected] https://www.freewrt.org/lists/listinfo/freewrt-developers
