Hi,
On Sat, 11 Nov 2006 at 14:41 +0000, Sven Geggus wrote:
> Hi there,
>
> I resolved my Wlan Problem using svn update.
>
> Anyway, here ist the next one:
>
> I made the following setup:
>
> --cut--
> auto lo
> iface lo inet loopback
>
> auto eth0.0
> iface eth0.0 inet manual
> switch-ports 1 2 3 4 5*
>
> auto eth1
> iface eth1 inet manual
> wireless-type broadcom
> wireless-country DE
> wireless-mode sta
> wireless-ssid geggus.net
> wireless-channel 11
> wireless-security open
>
> auto br0
> iface br0 inet static
> bridge-ifaces eth0.0 eth1
> address 192.168.4.10
> netmask 255.255.255.0
> gateway 192.168.4.1
> --cut--
>
> Unfortunately this does not work as expected. I am able to
> communicate from the Asus to either side of the bridge, but I am
> unable to transmit any package across the bridge.
Can you show us brctl show?
Are the bridge-utils installed?
Is ip forwarding active?
sysctl -a|grep net.ipv4.ip_forward
best regards
Waldemar
--
don't open your wrt, free it
http://www.freewrt.org
_______________________________________________
freewrt-developers mailing list
[email protected]
https://www.freewrt.org/lists/listinfo/freewrt-developers
