On Fri, Aug 15, 2008 at 11:00:56AM +1000, Terry Porter wrote:
> Hi All,
> This is my first post to the list, and have a question if anyone can please
> advise, it would be much appreciated ?
>
> FreeWRT versions is both 1.0 and 1.0.3, and the 1.0 was rebuild with a 'make
> distclean' prior to the problems below.
>
> I have had a WRT54 running FreeWRT previously and everything worked, but this
> time I can't connect via PPPoE, and the log shows the following items, would
> any of them be suspects as to why I cant connect using PPoE ?
>
>
>
> Jan 1 01:00:11 (none) daemon.info pppd[255]: Plugin rp-pppoe.so loaded.
> Jan 1 01:00:11 (none) daemon.err pppd[255]: Linux kernel does not support
> PPPoE -- are you running 2.4.x?
> Jan 1 01:00:11 (none) daemon.info pppd[255]: Exit.
>
>
> Jan 1 01:00:12 (none) daemon.notice ez-ipupdate[272]: (ssh.selfip.org)
> unable to resolve interface ppp0
> Jan 1 01:00:12 (none) user.info : /usr/sbin/adsl-start:
> /usr/sbin/adsl-start: 186: /usr/bin/echo: not found
> Jan 1 01:00:13 (none) daemon.notice adsl-connect: ADSL connection lost;
> attempting re-connection.
> Jan 1 01:00:15 (none) user.info : /usr/sbin/adsl-start:
> /usr/sbin/adsl-start: 186: /usr/bin/echo: not found
> Jan 1 01:00:17 (none) user.info : /usr/sbin/adsl-start:
> /usr/sbin/adsl-start: 186: /usr/bin/echo: not found
>
> There is no /usr/bin/echo in the system, as its located at [EMAIL
> PROTECTED]:~$ which echo
> /bin/echo. Could this be stopping the process, and how to fix as I can;t add
> a symlink on a write only flash system ?
>
>
> regarding PPPoE:
> This is my package list, and the passwords etc all worked in the last working
> setup :-
>
> -rw-r--r-- 1 tp tp 9490 Aug 14 22:22 Packages
> -rw-r--r-- 1 tp tp 3277 Aug 14 21:14
> base-files-brcm-2.4-linksys-wrt54g-31-squashfs-overlay_1.0-7_mipsel.ipk
> -rw-r--r-- 1 tp tp 12562 Aug 14 21:13 base-files_1.0-20_mipsel.ipk
> -rw-r--r-- 1 tp tp 72564 Aug 14 22:22 broadcom-nas_1_mipsel.ipk
> -rw-r--r-- 1 tp tp 43075 Aug 14 22:22 broadcom-wl-util_1.0-5_mipsel.ipk
> -rw-r--r-- 1 tp tp 333963 Aug 14 22:22 busybox_1.1.3-9_mipsel.ipk
> -rw-r--r-- 1 tp tp 104644 Aug 14 22:22 dropbear_0.51-1_mipsel.ipk
> -rw-r--r-- 1 tp tp 27267 Aug 14 22:22 ez-ipupdate_3.0.11b8-2_mipsel.ipk
> -rw-r--r-- 1 tp tp 20237 Aug 14 22:22 fwcf_1.03-1_mipsel.ipk
> -rw-r--r-- 1 tp tp 3607 Aug 14 22:22 jffs2root_1.0-1_mipsel.ipk
> -rw-r--r-- 1 tp tp 667 Aug 14 21:13 kernel_brcm-2.4-2.4.36.6_mipsel.ipk
> -rw-r--r-- 1 tp tp 4159 Aug 14 22:22
> kmod-broadcom-diag_2.4.36.6-brcm-1.0-1_mipsel.ipk
> -rw-r--r-- 1 tp tp 248274 Aug 14 22:22
> kmod-broadcom-wl_2.4.36.6-brcm-1_mipsel.ipk
> -rw-r--r-- 1 tp tp 5108 Aug 14 22:22
> kmod-switch-core_2.4.36.6-brcm-0.1-2_mipsel.ipk
> -rw-r--r-- 1 tp tp 4966 Aug 14 22:22
> kmod-switch-robo_2.4.36.6-brcm-0.1-2_mipsel.ipk
> -rw-r--r-- 1 tp tp 6402 Aug 14 22:22
> kmod-wlcompat_2.4.36.6-brcm-1.0-3_mipsel.ipk
> -rw-r--r-- 1 tp tp 71150 Aug 14 22:22 libpcap_0.9.5-1_mipsel.ipk
> -rw-r--r-- 1 tp tp 5957 Aug 14 22:22 mtd_1.0-7_mipsel.ipk
> -rw-r--r-- 1 tp tp 16687 Aug 14 22:22 nvram_1.0-1_mipsel.ipk
> -rw-r--r-- 1 tp tp 11253 Aug 14 22:22 ppp-mod-pppoe_2.4.4-1_mipsel.ipk
> -rw-r--r-- 1 tp tp 126297 Aug 14 22:22 ppp_2.4.4-1_mipsel.ipk
> -rw-r--r-- 1 tp tp 26178 Aug 14 22:22 pppoe-client_3.5-2_mipsel.ipk
> -rw-r--r-- 1 tp tp 263489 Aug 14 22:22 tcpdump_3.9.5-1_mipsel.ipk
> -rw-r--r-- 1 tp tp 206702 Aug 14 21:13 uclibc_0.9.28-20_mipsel.ipk
> -rw-r--r-- 1 tp tp 47789 Aug 14 22:22 wireless-tools_29-1_mipsel.ipk
Hi,
for PPPoE you need a kernel module "pppoe" and just the pppd. Here is an
example config:
# WAN port: PPPoE (with additional IP to access to your modem)
auto eth0.1
iface eth0.1 inet static
switch-ports 0 5
address 10.0.0.1
netmask 255.255.255.0
broadcast +
auto ppp0
iface ppp0 inet ppp
use-template dsl
provider dsl
ppp-username [EMAIL PROTECTED]
ppp-password verysecret
ppp-device eth0.1
Dirk
_______________________________________________
freewrt-developers mailing list
[email protected]
https://www.freewrt.org/lists/listinfo/freewrt-developers
