Am Freitag, 25. Juli 2008 12:56:43 schrieb Stefan: > Hello, > > I have a problem with the WLAN Connection to my Router WL-500GP. > > After the Installation* of FreeWRT a SSH LAN Connection was(and is) > possible. I configured the data file "Interfaces" like this: > > auto eth2 > iface eth2 inet static > address 192.168.10.1 > netmask 255.255.255.0 > broadcast + > wireless-type broadcom > wireless-country DE > wireless-mode ap > wireless-ssid ------- > wireless-channel 5 > wireless-security wpa-psk > wireless-authorization psk psk2 > wireless-encryption aes+tkip > wireless-wpa-key ------ > > I committed my changes after with the command "fwcf commit" and reboot > the Router. And now the red/orange LED over Air is lighted and I can see > the ssid in the Wlan-Network but can't neither connection nor Ping it. >
Hi Stefan, seems you made everything right on the router. Your next steps have to be - check if your client correctly connects to the wlan using wpa/wpa2 and the wpa-key - then you have to set the ip address of the client manually unless you also configured dnsmasq or dhcpd on your router (you did not mention that). If you are not sure if your client's WLAN is working correct you should try with WEP encryption first and if it works fine change to WPA. Martin _______________________________________________ freewrt-users mailing list freewrt-users@freewrt.org https://www.freewrt.org/lists/listinfo/freewrt-users
