Hallo Jan, bitte so lassen, das hat schon seinen Sinn so. Eine MTU von 1528 können wir effizient nicht über das Netz übertragen. Daher die Meldung einfach ignorieren.
LG Nico > Am 18.12.2016 um 17:53 schrieb Jan <[email protected]>: > > Moin. > > dmesg schmeißt mir auf meinen Knoten folgende Meldungen raus: > > > Nanostation M2 > > batman_adv: bat0: The MTU of interface br-wan is too small (1500) to > handle the transport of batman-adv packets. Packets going over this > interface will be fragmented on layer2 which could impact the > performance. Setting the MTU to 1528 would solve the problem. > > WDR4900 (Uplink) > > batman_adv: bat0: The MTU of interface br-mesh_lan is too small (1500) > to handle the transport of batman-adv packets. Packets going over this > interface will be fragmented on layer2 which could impact the > performance. Setting the MTU to 1528 would solve the problem. > > batman_adv: bat0: The MTU of interface mesh-vpn is too small (1280) to > handle the transport of batman-adv packets. Packets going over this > interface will be fragmented on layer2 which could impact the > performance. Setting the MTU to 1528 would solve the problem. > > > Wie kann ich die MTU der jeweiligen Interfaces auf 1528 setzen? Oder > würde ich dadurch evt. was kaputt machen? > > Firmware ist 0.8+exp20161109 > > Schöne Grüße, Jan > > > _______________________________________________ > Freifunk mailing list > [email protected] > https://www.hamburg.ccc.de/mailman/listinfo/freifunk _______________________________________________ Freifunk mailing list [email protected] https://www.hamburg.ccc.de/mailman/listinfo/freifunk
