Git-Url: http://git.frugalware.org/gitweb/gitweb.cgi?p=frugalware-current.git;a=commitdiff;h=41dfe398f79fe0da4fe98769b0244b56a113c70d
commit 41dfe398f79fe0da4fe98769b0244b56a113c70d Author: James Buren <[email protected]> Date: Mon Jul 30 03:00:17 2012 -0500 hylafax-4.4.4-1-x86_64 * remove package * 4 years since last distro change, so no one who can test it seems to be left. diff --git a/source/apps-extra/hylafax/FaxDispatch b/source/apps-extra/hylafax/FaxDispatch deleted file mode 100644 index 97b09bd..0000000 --- a/source/apps-extra/hylafax/FaxDispatch +++ /dev/null @@ -1,32 +0,0 @@ -## $Id: FaxDispatch,v 1.2 2003/05/04 23:49:41 darren Exp $ -## -## Default FaxDispatch file - routes all inbound faxes to FaxMaster as PDF -## -## Consult the faxrcvd(8C) man page for more information -## - -SENDTO=FaxMaster; # by default email to FaxMaster -FILETYPE=pdf; # in PDF format - - -## -## This excerpt from the man page gives you an idea of what's possible here -## -## You can route by sender's TSI -#case "$SENDER" in -# *1*510*526*1212*) SENDTO=sam;; # Sam's test rig in Berkeley -# *1*415*390*1212*) SENDTO=raster@asd;; # 7L Xerox room, used for scanning -# *5107811212) SENDTO=peebles@mti;; # stuff from home -#esac - -## and/or by device -#case "$DEVICE" in -# ttyS1) SENDTO=john;; # all faxes received on ttyS1 -# ttyLT0) SENDTO=mary@home;; # all faxes received on ttyLT0 -#esac - -## and/or by caller id -#case "$CIDNUMBER" in -# 435*) SENDTO=lee; FILETYPE=pdf;; # all faxes from area code 435 -# 5059627777) SENDTO=amy; FILETYPE=tif;; # Amy wants faxes in TIFF -#esac diff --git a/source/apps-extra/hylafax/FrugalBuild b/source/apps-extra/hylafax/FrugalBuild deleted file mode 100644 index f9782eb..0000000 --- a/source/apps-extra/hylafax/FrugalBuild +++ /dev/null @@ -1,87 +0,0 @@ -# Compiling time: 0.37 SBU -# Maintainer: Janos Kovacs <[email protected]> - -pkgname=hylafax -pkgver=4.4.4 -pkgrel=1 -pkgdesc="The world's most advanced open source fax server" -url="http://www.hylafax.org/content/Main_Page"; -depends=('libtiff' 'ghostscript' 'postfix' 'libgc') -groups=('apps-extra') -archs=('i686' 'x86_64') -up2date="lynx -dump ftp://ftp.hylafax.org/source/|Flasttar" -backup=(var/spool/hylafax/etc/config,hosts.hfaxd,hfaxd.conf,setup.cache \ - var/spool/hylafax/bin/{faxrcvd,notify} \ - etc/hylafax/{faxcover.ps,hfaxd.conf,pagesizes,typerules} \ - etc/{logrotate.d,cron.daily,cron.hourly,sysconfig}/hylafax) -source=(ftp://ftp.hylafax.org/source/${pkgname}-${pkgver}.tar.gz \ - gcc43.patch rc.hylafax hylafax_{hourly,daily}.cron hylafax_logrotate \ - hylafax_sysconfig config config.modem setup.{cache,modem} hyla.conf \ - FaxDispatch jobcontrol.sh README.Frugalware) -install=${pkgname}.install -sha1sums=('6a866765e48c4c851b4fdc45c7145d0bf18b2143' \ - 'f6b72bddd590919f72f865d81ecf5d0f9b3c0fd0' \ - 'e1bb98f56ca6cb569a8aa59455517a1c3cda5b30' \ - '27efd29a2322c9c6a88782148061b851bc8c8648' \ - '34040ed178436886f7e0f6d7eade987973ed7635' \ - '2858c9ae7b2590808108b6ea9a2a951d6c3beb3e' \ - '20d2dfc26e8284c829312e4f182b45e541b3df58' \ - '432e34bd25c9e6d2397b337c19b2a213dfe916d3' \ - '22f3855c5d4a39254fca49707d20b294adf38f69' \ - '7effd6f4df343127538f3956a39bb8ee594f449b' \ - '0d49e7ab0bfbe4893595579c905f17da10d0ed44' \ - 'ded2551db900b81e71969479676008bf9955a86f' \ - '1c6469d09049e67a9035cd8360de4b42114ca8cf' \ - 'ab8af44c36d7c4c770b1387dda8ff55aaf5b1fff' \ - '7c37b6c5533cda26ccb5599c857aaafc5628f45d') - -unset MAKEFLAGS - -build() { - Fpatch gcc43.patch - Fmkdir {usr/{bin,lib,share/{doc,man},sbin},var/spool/hylafax,etc/hylafax} - ./configure \ - --with-DIR_BIN=/usr/bin \ - --with-DIR_SBIN=/usr/sbin \ - --with-DIR_LIB=/usr/lib \ - --with-DIR_LIBEXEC=/usr/sbin \ - --with-DIR_LIBDATA=/etc/hylafax \ - --with-DIR_LOCKS=/var/lock \ - --with-LIBDIR=/usr/lib \ - --with-TIFFBIN=/usr/bin \ - --with-DIR_MAN=/usr/share/man \ - --with-PATH_GSRIP=/usr/bin/gs \ - --with-DBLIBINC=/usr/include \ - --with-LIBTIFF="-ltiff -ljpeg -lz" \ - --with-DIR_SPOOL=/var/spool/hylafax \ - --with-AFM=no \ - --with-AWK=/usr/bin/gawk \ - --with-PATH_VGETTY=/sbin/vgetty \ - --with-HTML=no \ - --with-PAGESIZE=A4 \ - --with-PATH_DPSRIP=/var/spool/hylafax/bin/ps2fax \ - --with-PATH_IMPRIP="" \ - --with-SYSVINIT=/etc/rc.d/rc.hylafax \ - --with-INTERACTIVE=no || Fdie - make || Fdie - Fmakeinstall ROOT=${Fdestdir} - Ffileschmod var/spool/hylafax/bin/ 755 - Fln /etc/hylafax /usr/lib/fax - Fexe hylafax_hourly.cron etc/cron.hourly/hylafax - Fexe hylafax_daily.cron etc/cron.daily/hylafax - Ffile hylafax_logrotate etc/logrotate.d/hylafax - Ffile hylafax_sysconfig etc/sysconfig/hylafax - Ffile var/spool/hylafax/config/defaults/config - Ffile var/spool/hylafax/config/defaults/config.modem - Ffile var/spool/hylafax/config/defaults/setup.cache - Ffile var/spool/hylafax/config/defaults/setup.modem - Ffile etc/hylafax/hyla.conf - Ffile var/spool/hylafax/etc/FaxDispatch - Fexe var/spool/hylafax/bin/jobcontrol.sh - Fln ps2fax.gs var/spool/hylafax/bin/ps2fax - Fln pdf2fax.gs var/spool/hylafax/bin/pdf2fax - Fdoc README.Frugalware - Fdocrel CONTRIBUTORS COPYRIGHT README -} - -# optimization OK diff --git a/source/apps-extra/hylafax/README.Frugalware b/source/apps-extra/hylafax/README.Frugalware deleted file mode 100644 index c77d32c..0000000 --- a/source/apps-extra/hylafax/README.Frugalware +++ /dev/null @@ -1,20 +0,0 @@ -Welcome to the README! Thanks for taking the time to find it ;-) - -For an introduction to the wonderful world of HylaFAX(tm), please see -http://www.hylafax.org/. Beginners should head directly to the docs: - - http://www.hylafax.org/content/Documentation - -If you have a question which you think relates only to the FPM version -of HylaFAX post a bug to the Frugalware BTS: - - http://bugs.frugalware.org/ - -You should also be aware of the following system modification: 'FaxMaster' is -added to `/etc/postfix/aliases` after installation automatically. - -The default configuration files can be found under -`/var/spool/hylafax/config/defaults/`. You can copy these files to the -`/var/spool/hylafax/etc/` directory and modify them there. - -Enjoy! diff --git a/source/apps-extra/hylafax/config b/source/apps-extra/hylafax/config deleted file mode 100644 index 06f2c92..0000000 --- a/source/apps-extra/hylafax/config +++ /dev/null @@ -1,7 +0,0 @@ -LogFacility: daemon -#CountryCode: 1 -#AreaCode: 999 -#LongDistancePrefix: 1 -#InternationalPrefix: 011 -#DialStringRules: "etc/dialrules" -ServerTracing: 1 diff --git a/source/apps-extra/hylafax/config.modem b/source/apps-extra/hylafax/config.modem deleted file mode 100644 index 0d8ff6b..0000000 --- a/source/apps-extra/hylafax/config.modem +++ /dev/null @@ -1,96 +0,0 @@ -# $Id: rockwell,v 1.2 1996/06/24 02:58:40 sam Rel $ -# -# HylaFAX Facsimile Software -# -# Copyright (c) 1990-1996 Sam Leffler -# Copyright (c) 1991-1996 Silicon Graphics, Inc. -# HylaFAX is a trademark of Silicon Graphics, Inc. -# -# Permission to use, copy, modify, distribute, and sell this software and -# its documentation for any purpose is hereby granted without fee, provided -# that (i) the above copyright notices and this permission notice appear in -# all copies of the software and related documentation, and (ii) the names of -# Sam Leffler and Silicon Graphics may not be used in any advertising or -# publicity relating to the software without the specific, prior written -# permission of Sam Leffler and Silicon Graphics. -# -# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -# -# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -# OF THIS SOFTWARE. -# - -# -# Configuration for a Rockwell-based modem not otherwise handled by -# another prototype configuration file. This file assumes the modem -# is compatible with the Rc144AC, RC96AC or RC144DP. -# -# This configuration file sets up the modem to run at 38.4 with -# RTS/CTS flow control used by default. XON/XOFF is automatically -# enabled for fax recv. Beware of modems that also lock sending -# to 19.2; add ModemSendBeginCmd: "<19200>" if this is required. -# Also beware that the adaptive-answer facility, when supported, -# is often unreliable. -# -# -CountryCode: 1 -AreaCode: 999 -FAXNumber: +1.999.555.1212 -LongDistancePrefix: 1 -InternationalPrefix: 011 -DialStringRules: "etc/dialrules.sf-ba" -ServerTracing: 1 -SessionTracing: 11 -RecvFileMode: 0600 -LogFileMode: 0600 -DeviceMode: 0600 -RingsBeforeAnswer: 1 -SpeakerVolume: off -GettyArgs: "-h %l %s" -LocalIdentifier: "Silent Valley Sys" -TagLineFont: etc/lutRS18.pcf -TagLineFormat: "From %%l|%c|Page %%p of %%t" -MaxRecvPages: 25 -# -# -# Modem-related stuff: should reflect modem command interface -# and hardware connection/cabling (e.g. flow control). -# -ModemType: Class2 # use class 2 interface -ModemRate: 38400 -ModemFlowControl: rtscts # default -# -ModemResetCmds: AT&F # what you want for a Supra -ModemNoFlowCmd: AT&K0 # disable flow control cmd -ModemHardFlowCmd: AT&K3 # hardware flow control cmd -ModemSoftFlowCmd: AT&K4 # software flow control cmd -ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset -#ModemSetupDTRCmd: AT&D2S25=1S38=0 # Dynalink 1414VE needs this -ModemSetupDCDCmd: AT&C1 # DCD follows carrier -ModemSetupAACmd: AT+FAA=1+FCLASS=0 # enable in current class -# -ModemSendFillOrder: LSB2MSB # as expected -ModemRecvFillOrder: MSB2LSB # opposite of what makes sense -# -ModemAnswerFaxBeginCmd: "<19200><rts>" # modem switches on fax receive -# -# Caller ID configuration setup for Supra. -# -#QualifyCID: etc/cid # CID access control list file -#CIDNumber: "NMBR = " # pattern string for phone number info -#CIDName: "NAME = " # pattern string for identity info -Class2RecvDataTrigger: "\022" # character sent to modem to start recv - - - - - - - - diff --git a/source/apps-extra/hylafax/gcc43.patch b/source/apps-extra/hylafax/gcc43.patch deleted file mode 100644 index 39891dc..0000000 --- a/source/apps-extra/hylafax/gcc43.patch +++ /dev/null @@ -1,23 +0,0 @@ -diff -Nur hylafax-4.4.4.orig/configure hylafax-4.4.4/configure ---- hylafax-4.4.4.orig/configure 2007-11-21 15:45:23.000000000 +0100 -+++ hylafax-4.4.4/configure 2008-04-20 17:36:02.000000000 +0200 -@@ -1306,7 +1306,7 @@ - fi - - cat>dummy.C<<EOF --#include "new.h" -+#include <new> - struct foo { - int x; - foo(); -@@ -1418,8 +1418,8 @@ - CheckForCXXRuntime() - { - cat>t.c++<<EOF --#include "iostream.h" --int main(){ cout << "Hello World!" << endl; return 0;} -+#include <iostream> -+int main(){ std::cout << "Hello World!" << std::endl; return 0;} - EOF - runMake t "t:; \${C++F} \${C++FILE} t.c++${MAKECXXOVERRIDE}" - } diff --git a/source/apps-extra/hylafax/hyla.conf b/source/apps-extra/hylafax/hyla.conf deleted file mode 100644 index b3703d6..0000000 --- a/source/apps-extra/hylafax/hyla.conf +++ /dev/null @@ -1,46 +0,0 @@ -# hyla.conf -# -# This is the system-wide config file used by HylaFAX client programs: -# sendfax, faxstat, faxalter, faxmail, faxrm, sendpage, faxwatch, -# textfmt. -# The per-user config file is ~/.hylarc, which has the same syntax of -# hyla.conf. -# -# Below you find some examples. Read the man pages of the HylaFAX client -# programs for a complete list of the parameters that can be used in this file. -# - -# Vertical resolution for outgoing faxes. -# Default is 98 lines/inch, aka 'low', better is 196 lines/inch, aka 'fine'. -# Equivalent to 'sendfax' -l and -m options. -VRes: 196 - -# KillTime: time before expiring a job. -# Default is 3 hours. Equivalent to 'sendfax' -k option. -# Tipically this is needed when bulk faxing. -#KillTime: "now +24 hours" # Give jobs 24h before expiring them - -# Notify policy (for outgoing faxes). -# Default is to notify only in case of problems. Equivalent to 'sendfax' -# -D option. -#Notify: Done # Notify even for succesfully sent jobs - -# 'faxstat' output -# Uncomment this to change the format of 'faxstat' output to show the -# date/time the faxes will be/have been transmitted. -#JobFmt: "%-4j %-19Y %1a %6.6o %-14.14e %5P %5D %.25s" # faxstat -sdl output - -# Network HylaFAX server: redirect all client commands to an HylaFAX server. -# Uncomment this if this system has no fax-modems connected to it, and there -# is an HylaFAX server on your network. Equivalent to 'sendfax' -h option. -#Host: faxserver.mydomain.dom - -# Pagesize; RPM default is 'a4' -#PageSize: letter - -# Disable PageChopping. Default is to chop. -#PageChop: none # Avoid page chopping - -# Cover page date format. -#DateFormat: "%d/%m/%Y %H:%M:%S" # 'European style' (day, month, year) - diff --git a/source/apps-extra/hylafax/hylafax.install b/source/apps-extra/hylafax/hylafax.install deleted file mode 100644 index 973e50d..0000000 --- a/source/apps-extra/hylafax/hylafax.install +++ /dev/null @@ -1,25 +0,0 @@ -post_install() { - if [ -e /usr/sbin/chkconfig ] && [ -x /usr/sbin/chkconfig ]; then - /usr/sbin/chkconfig --add rc.hylafax - fi - if [ -e /etc/postfix/aliases ]; then - echo "FaxMaster: root" >> /etc/postfix/aliases - newaliases - fi - -} - -pre_remove() { - if [ -e /usr/sbin/chkconfig ] && [ -x /usr/sbin/chkconfig ]; then - /usr/sbin/chkconfig --del rc.hylafax - fi - if [ -e /etc/postfix/aliases ]; then - sed -i '/^FaxMaster/d' /etc/postfix/aliases - newaliases - fi -} - -op=$1 -shift - -$op $* diff --git a/source/apps-extra/hylafax/hylafax_daily.cron b/source/apps-extra/hylafax/hylafax_daily.cron deleted file mode 100644 index 21bf091..0000000 --- a/source/apps-extra/hylafax/hylafax_daily.cron +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh - -# Run the daily report with conservative settings (delete as little as possible) -# If you're short on disk space, you might want to tune this commandline. -# Don't run faxcron if HylaFAX has not been setup using faxsetup. - -# 'man faxcron' for more info - -if [ -f /var/spool/hylafax/etc/setup.cache -o -f /var/spool/fax/etc/setup.cache ]; then - /usr/sbin/faxcron \ - -info 60 \ - -log 730 \ - -rcv 3650 \ - -tmp 7 | mail -s "HylaFAX Usage Report" faxmaster -fi - -exit 0 diff --git a/source/apps-extra/hylafax/hylafax_hourly.cron b/source/apps-extra/hylafax/hylafax_hourly.cron deleted file mode 100644 index 3eadea7..0000000 --- a/source/apps-extra/hylafax/hylafax_hourly.cron +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -# Run the fax queue cleaner with conservative settings (delete as little as possible) -# If you're short on disk space, you might want to tune this commandline. - -# 'man faxqclean' for more info - -/usr/sbin/faxqclean -j 604800 -d 604800 - -exit 0 diff --git a/source/apps-extra/hylafax/hylafax_logrotate b/source/apps-extra/hylafax/hylafax_logrotate deleted file mode 100644 index 6272bda..0000000 --- a/source/apps-extra/hylafax/hylafax_logrotate +++ /dev/null @@ -1,7 +0,0 @@ -/var/spool/hylafax/etc/xferfaxlog { - missingok - notifempty - rotate 3 - monthly - compress -} diff --git a/source/apps-extra/hylafax/hylafax_sysconfig b/source/apps-extra/hylafax/hylafax_sysconfig deleted file mode 100644 index b36407f..0000000 --- a/source/apps-extra/hylafax/hylafax_sysconfig +++ /dev/null @@ -1,16 +0,0 @@ -## This is the HylaFAX init script configuration file. -## Options specified in this file will be used when starting -## and stopping HylaFAX. - -## devices name -## (if you have more devices, use space as a separator) -HFAXD_DEVICES="ttyS0" - -## HylaFAX Spool directory if different from the default of /var/spool/hylafax -SPOOL=/var/spool/hylafax - -## Accept connections to hfaxd using the old protocol -HFAXD_OPTS="-i hylafax -o 4559" - -## Extra args to be passed to hfaxd -HFAXD_EXTRA_ARGS= diff --git a/source/apps-extra/hylafax/jobcontrol.sh b/source/apps-extra/hylafax/jobcontrol.sh deleted file mode 100644 index f150fba..0000000 --- a/source/apps-extra/hylafax/jobcontrol.sh +++ /dev/null @@ -1,136 +0,0 @@ -#!/bin/sh - -## More sample jobcontrol programs can be found at -## http://www.hylafax.org/content/JobControl - -## -## This is a sample jobcontrol program for HylaFAX that can be used -## to Virtualize a fax service for various "client" companies in a -## single HylaFAX installation -## -## This virtualization does a few things: -## 1) Verifies client -## 2) Rejects jobs that the client submitted that we consider -## Malicious -## 3) Set's Modem based on destination and client settings -## 4) Set's faxsend options to make the job appear from the client's own -## FAX service -## -## This assumes that by default, faxsend is configured not allow TSI -## modification, and is branded with our fax service branding/numbers/etc. -## -## To get full milage from this type of JobControl, you should have the -## following settings in $SPOOL/etc/config for FaxQueuer: -## MaxBatchJobs: 1 -## JobControlCmd: bin/jcontrol.sh -## JobControlWait: false -## - -JOBID=$1 - -## GetClient <owner> <email> -## - returns a string - the client identifier - -## Result of "REJECT" is a non-authorized submitter, and -## should be rejected. -## Result of "" means it's not a virtualized client and -## should be subject to our default modem settings -GetClient () -{ - # Pretend to lookup the user - case "$1" in -# aidan) -# echo "1234" -# ;; -# root) -# echo "REJECT" -# ;; - *) - # All others are not full virtual clients - echo "" - esac -} - -## -## GetJobParam <param> -## - returns the value of the job param -GetJobParam () -{ - grep "^$1:" sendq/q$JOBID | cut -d : -f 2- -} - -## -## SetControlParam <tag> <value> -SetControlParam () -{ - echo "$1: \"$2\"" -} - -OWNER=$(GetJobParam owner) -EMAIL=$(GetJobParam mailaddr) - - -CLIENT=$(GetClient "$OWNER" "$EMAIL") - -if [ "$CLIENT" == "REJECT" ] -then - SetControlParam RejectNotice "Not authorized" - exit -fi - -# Only client 1234 is allowed to specify ModemGroups -#if [ "$CLIENT" != 1234 ] -#then -# MODEM=$(GetJobParam modem) -# if [ "$MODEM" != "any" ] -# then -# SetControlParam RejectNoctice "Modem setting of $MODEM not allowed - use any" -# exit -# fi -#fi - -# Set the modemgroup based on the destination -# We're strict on the given number format - it must be a cannonical -# number (including the +) -DEST=$(GetJobParam number) -#case "$DEST" in -# 82??) ## Our local extensions -# SetControlParam Modem "PBX" -# ;; -# +1215*) -# SetControlParam Modem "Local" -# ;; -# +1*) -# SetControlParam Modem "NA" -# ;; -# +44*) -# SetControlParam Modem "UK" -# ;; -# *) -# SetControlParam RejectNotice "Not a number we support - see numbering FAQ" -# ;; -#esac - - -## -## And now client-specific settings - -#case "$CLIENT" in -# 1234) -# # These guys can do whatever they want - they pay big bucks for the -# # privilege -# SetControlParam UseJOBTSI true -# SetControlParam UseJobTagLine true -# ;; -# 5678) -# # These guys aren't nice -# SetControlParam LocalIdentifier "Company XYX" -# SetControlParam DesiredBR 14400 -# SetControlParam TagLineFormat "From %%n|%c|Page %%P of %%T" -# SetControlParam TimeOfDay "000000-065959,190000-235900" -# ;; -# *) -# # And our regular guys -# SetControlParam DesiredBR 9600 -#esac - diff --git a/source/apps-extra/hylafax/rc.hylafax b/source/apps-extra/hylafax/rc.hylafax deleted file mode 100644 index aaf60ae..0000000 --- a/source/apps-extra/hylafax/rc.hylafax +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/sh - -# 2008 Janos Kovacs <[email protected]> -# rc.hylafax for Frugalware -# distributed under GPL License -# chkconfig: 2345 99 01 -# description: Init script to bring up hylafax server -# Starting the HylaFAX hfaxd and faxq Daemons at Boot. - -source /lib/initscripts/functions -TEXTDOMAIN=hylafax -TEXTDOMAINDIR=/lib/initscripts/messages - -actions=(restart status start stop) -daemon=$"HylaFAX" - -# Source HylaFAX configuration -if [ -f /etc/sysconfig/hylafax ] ; then - . /etc/sysconfig/hylafax -fi - -# check config file -if [ -f $SPOOL/etc/setup.cache ] ; then - . $SPOOL/etc/setup.cache -else - cat<<-EOF - - HylaFAX FATAL ERROR: $SPOOL/etc/setup.cache is missing! - - The file $SPOOL/etc/setup.cache is not present. - This probably means the machine has not been setup using the - faxsetup(8C) command. Read the documentation on setting up - HylaFAX before you startup a server system. - - EOF - exit 1 -fi - -rc_start() { - start_msg - /usr/sbin/faxgetty $HFAXD_DEVICES & - /usr/sbin/hfaxd $HFAXD_OPTS $HFAXD_EXTRA_ARGS - /usr/sbin/faxq - ok $? -} - -rc_stop() { - stop_msg - killall faxgetty - killall hfaxd - /usr/sbin/faxquit - ok $? -} - -rc_exec $1 diff --git a/source/apps-extra/hylafax/setup.cache b/source/apps-extra/hylafax/setup.cache deleted file mode 100644 index 281e95b..0000000 --- a/source/apps-extra/hylafax/setup.cache +++ /dev/null @@ -1,35 +0,0 @@ -# Warning, this file was automatically generated by faxsetup -# on Tue Oct 21 15:51:18 EDT 1997 for root -AFMDIR='/usr/share/ghostscript/fonts' -AWK='/usr/bin/mawk' -BIN='/usr/bin' -CAT='/bin/cat' -CHGRP='/bin/chgrp' -CHMOD='/bin/chmod' -CHOWN='/bin/chown' -CP='/bin/cp' -DPSRIP='/var/spool/hylafax/bin/ps2fax' -ECHO='/bin/echo' -GREP='/bin/grep' -GSRIP='/usr/bin/gs' -IMPRIP='/usr/share/fax/psrip' -LIBDATA='/usr/share/fax' -LIBEXEC='/usr/sbin' -LN='/bin/ln' -MANDIR='/usr/man' -MKFIFO='/usr/bin/mkfifo' -MV='/bin/mv' -PATH='/usr/sbin:/bin:/usr/bin:/etc:/usr/local/bin' -PATHEGETTY='/bin/egetty' -PATHGETTY='/sbin/getty' -PATHVGETTY='/sbin/vgetty' -PSPACKAGE='gs' -RM='/bin/rm' -SBIN='/usr/sbin' -SCRIPT_SH='/bin/bash' -SED='/bin/sed' -SENDMAIL='/usr/sbin/sendmail' -SPOOL='/var/spool/hylafax' -TIFFBIN='/usr/bin' -UUCP_LOCKDIR='/var/lock' -UUCP_LOCKTYPE='ascii' diff --git a/source/apps-extra/hylafax/setup.modem b/source/apps-extra/hylafax/setup.modem deleted file mode 100644 index c18c9c2..0000000 --- a/source/apps-extra/hylafax/setup.modem +++ /dev/null @@ -1,40 +0,0 @@ -# Warning, this file was automatically generated by faxsetup -# on Tue Oct 21 15:51:14 EDT 1997 for root -prompt() -{ - echo -n "$* " -} - ttyPort() - { - expr $1 : 'tty\(.*\)' - } - ttyLocks() - { - echo $UUCP_LOCKDIR/LCK..$1 - } - ttyAliases() - { - echo /dev/$1 - } - ttyDev() - { - echo /dev/$1 - } - checkPort() - { - return - } - ttyStty() - { - echo /bin/stty - } - ttySpeeds() - { - speeds= - if [ -z "$SPEED" ]; then - for s in 38400 19200 9600 4800 2400 1200; do - onDev /bin/stty $s </dev/null >/dev/null 2>&1 && speeds="$speeds $s" - done - fi - echo $speeds - } _______________________________________________ Frugalware-git mailing list [email protected] http://frugalware.org/mailman/listinfo/frugalware-git
