Dear all,
I have a question,
"I only have a single network connection, but I would like all my computers
to have Internet access.
How is this possible?'
1.What i have?
My network configuration is as follows:-
eth1
(172.21.0.133/28)
|
|
AGNI {RedHat 9[Squid Proxy,Gateway ,firewall & FTP] }
|
|
|
(192.168.0.0/16)
eth0
|
---- SWITCH----------
|
|
|
LAN
where:-
eth0-Intel Corp. 82557/8/9 [Ethernet Pro 100]
eth1-Broadcom Corporation NetXtreme BCM5702 Gigabit Ethernet
2.What i have done:-
a)Enabled IP forwarding
echo 1 > /proc/sys/net/ipv4/ip_forward
& added above line in /etc/rc.d/rc.local
b)Firewall rules as follows:-
# vi testWall
1 *filter
2 :INPUT DROP [0:0]
3 :FORWARD DROP [0:0]
4 :OUTPUT DROP [0:0]
5
6 # allow local loopback connections
7 -A INPUT -i lo -j ACCEPT
#allow echo-requests (pinging)
8 -A INPUT -s 192.168.0.0/16 -d 0/0 -p icmp --icmp-type echo-request -j
ACCEPT
9 # drop INVALID connections
10 -A INPUT -m state --state INVALID -j DROP
11 -A OUTPUT -m state --state INVALID -j DROP
12 -A FORWARD -m state --state INVALID -j DROP
13
14 # allow all established and related
15 -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
16 -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
17 -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
18
19 # allow connections to my ISP's DNS servers
20 -A OUTPUT -d 2.3.4.10 -m state --state NEW -p udp --dport 53 -o eth0 -j
ACCEPT
21 -A OUTPUT -d 2.3.4.11 -m state --state NEW -p udp --dport 53 -o eth0 -j
ACCEPT
22 -A FORWARD -d 2.3.4.10 -m state --state NEW -p udp --dport 53 -i eth0 -o
eth0 -j ACCEPT
23 -A FORWARD -d 2.3.4.11 -m state --state NEW -p udp --dport 53 -i eth0 -o
eth0 -j ACCEPT
24
25 # allow outgoing connections to web servers
26 -A OUTPUT -d 0/0 -m state --state NEW -p tcp -m multiport --dport
http,https -o eth0 -j ACCEPT
27 -A FORWARD -d 0/0 -m state --state NEW -p tcp -m multiport --dport
http,https -o eth0 \
-i eth0 -j ACCEPT
28
29 # allow outgoing mail connections to my ISP's SMTP and POP3 server only
30 -A OUTPUT -d mail.my-isp.com -m state --state NEW -p tcp -m
multiport --dport smtp,pop3 \
-o eth0 -j ACCEPT
31 -A FORWARD -d mail.my-isp.com -m state --state NEW -p tcp -m
multiport --dport smtp,pop3 \
-o eth0 -j ACCEPT
32
33 # log all other attempted out going connections
34 -A OUTPUT -o eth0 -j LOG
35 -A FORWARD -j LOG
36 # default is to DROP out-going connections
37
38 COMMIT
39
40 *nat
41
42 # set up IP forwarding and nat
43 -A POSTROUTING -o eth0 -j SNAT --to 172.21.0.133
44
45 COMMIT
PS: Copied from http://linuxgazette.net/103/odonovan.html
#iptables-restore </root/testWall
#iptables-save
3.What i got:-
a)users can able to browse internet via squid proxy (192.168.0.1:3128)
i.e http/https
b)But can't able to access mails (POP3/SMTP) from our ISP mailserver.
can't able to go beyond my RedHat (AGNI) server, while i do traceroute of my
ISP's mailserver.
What i am doing wrong? please suggest
Thanks & regards,
Navneet Choudhary
-----------------------------------------------------------------
To get off this list, send email to [EMAIL PROTECTED]
with Subject: unsubscribe
-----------------------------------------------------------------
