On Thu, Jul 23, 2015 at 01:51:51PM -0700, Omar Sandoval wrote:
> From: Wang Yanfeng <[email protected]>
>
> Test of missing device replace in different raid modes. This
> test requires SCRATCH_DEV_POOL contain 5 same size devices.
>
> This issue has been fixed by Omar's patch:
> Btrfs: RAID 5/6 missing device scrub+replace
>
> Signed-off-by: Wang Yanfeng <[email protected]>
> Signed-off-by: Omar Sandoval <[email protected]>
> ---
> tests/btrfs/095 | 93
> +++++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/btrfs/095.out | 2 ++
> tests/btrfs/group | 1 +
> 3 files changed, 96 insertions(+)
> create mode 100755 tests/btrfs/095
> create mode 100644 tests/btrfs/095.out
>
> diff --git a/tests/btrfs/095 b/tests/btrfs/095
> new file mode 100755
> index 000000000000..2dfb919fe4f6
> --- /dev/null
> +++ b/tests/btrfs/095
> @@ -0,0 +1,93 @@
> +#! /bin/bash
> +# FS QA Test No. btrfs/095
> +#
> +# Test of missing device replace in different raid mode
> +#
> +# Be sure $SCRATCH_DEV_POOL including 5 devices. And all
> +# devices in pool must be in the same size.
> +#
> +# To check the fs after replacing a dev, a scrub run is performed.
> +#
> +# This issue has been fixed by Omar Sandoval's patch:
> +# Btrfs: RAID 5/6 missing device scrub+replace
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2015 Fujitsu. All Rights Reserved.
> +# Author: Wang Yanfeng <[email protected]>
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +status=1
> +trap "exit \$status" 0 1 2 3 15
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_need_to_be_root
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch
> +_require_scratch_dev_pool 5
Need a call of _require_scratch_dev_pool_equal_size here
> +_btrfs_get_profile_configs replace-missing
> +
> +rm -f $seqres.full
> +
> +REPLACE_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $5}'`
> +export SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | awk '{print $1,$2,$3,$4}'`
> +
> +run_test () {
> + local mkfs_opts=$1
echo the $mkfs_opts to $seqres.full is useful for debug purpose, so if
some profile config fails we know what config is failing.
echo "Test $mkfs_opts" >>$seqres.full
> + _scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1 || _fail "mkfs failed"
Continue to test next profile config if mkfs failed, _fail breaks out
the whole test.
> + _scratch_mount
> +
> + PRUNE_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $2}'`
> + PRUNE_DEV_ID=`$BTRFS_UTIL_PROG fi show $SCRATCH_MNT | grep $PRUNE_DEV |
> awk '{print $2}'`
> +
> + # dd some data
> + dd if=/dev/urandom of="$SCRATCH_MNT"/file1 bs=1M count=1 \
> + >>$seqres.full 2>&1 || _fail "dd failed"
> + dd if=/dev/urandom of="$SCRATCH_MNT"/file2 bs=1M count=2 \
> + >>$seqres.full 2>&1 || _fail "dd failed"
> + dd if=/dev/urandom of="$SCRATCH_MNT"/file3 bs=1M count=4 \
> + >>$seqres.full 2>&1 || _fail "dd failed"
I don't think the _fail here is necessary either.
> +
> + # prune the device PRUNE_DEV && remount by degraded mode
> + umount $SCRATCH_MNT
_scratch_unmount
> + dd if=/dev/zero of=$PRUNE_DEV bs=1M count=1 >>$seqres.full 2>&1 \
> + || _fail "dd failed"
$WIPEFS_PROG -a $PRUNE_DEV ?
> + mount -o degraded $SCRATCH_DEV $SCRATCH_MNT
_scratch_mount "-o degraded"
> +
> + # replace the missing dev $PRUNE_DEV with $REPLACE_DEV and scrub it
> + $BTRFS_UTIL_PROG replace start -B -r $PRUNE_DEV_ID $REPLACE_DEV \
> + $SCRATCH_MNT -f >>$seqres.full 2>&1 || _fail "replace failed"
Don't _fail here, just echo error messages to break golden image. Better
to append the error message to $seqres.full too, for debug purpose.
> + $BTRFS_UTIL_PROG scrub start -B $SCRATCH_MNT >>$seqres.full 2>&1 \
> + || _fail "scrub failed"
Here too.
> +
> + umount $SCRATCH_MNT
_scratch_unmount
> +}
> +
> +echo "Silence is golden"
> +for t in "${_btrfs_profile_configs[@]}"; do
> + run_test "$t"
> +done
> +
> +status=0
> +exit
> diff --git a/tests/btrfs/095.out b/tests/btrfs/095.out
> new file mode 100644
> index 000000000000..80ad3b9c2a7b
> --- /dev/null
> +++ b/tests/btrfs/095.out
> @@ -0,0 +1,2 @@
> +QA output created by 095
> +Silence is golden
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index ffe18bff0d21..f20a191c24be 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -96,3 +96,4 @@
> 092 auto quick send
> 093 auto quick clone
> 094 auto quick send
> +095 auto
Should also be in "replace" group.
Thanks,
Eryu
> --
> 2.4.6
>
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
