Hi all, Sorry for delay with answer, I am fighting critical issue. I'll answer to these questions ASAP.
Kind regards, Miroslav On Thu, May 15, 2014 at 6:33 PM, Gandhirajan Mariappan (CW) < [email protected]> wrote: > Hi Miroslav, > > > > We have few more queries with respect to Fuel Installation. Kindly clarify > us on the below 6 queries. > > > > *Setup Details:* > > > > Ø Our setup is as follows. I have configured VLAN configurations in the > switch (switch details are provided at end of the mail). Kindly let us know > if we need to do any more configuration in VDX device where nodes are > connected. > > > > > > [image: Uplink switch Gateway:10.24.40.1] > > > > > > > > > > > > > Eth0 > Eth0 Eth0 > > [image: Physical Server 10.24.41.121 ,Physical Server 10.24.41.122][image: > Physical Server 10.24.41.123] > > > > > > Eth1 > Eth1 Eth1 > > > > > > > > 13 > > [image: Brocade VDX 10.25.225.133] > 7 21 > > > > > > > > > > > *Physical Server 10.24.41.121 -> Fuel Master Node* > > *Physical Server 10.24.41.122 -> Slave 1. To be act as “Controller > Node/Cinder node”* > > *Physical Server 10.24.41.123 -> Slave 2. To be act as “Compute Node”* > > > > *Fuel Master – Physical or VM:* > > > > Ø I have 4 VMs (fuel master node IP : 10.20.0.2, fuel slave 1 : > 10.20.0.217, slave 2 : 10.20.0.252 and slave 3 : 10.20.0.198) hosted on a > physical machine(Ubuntu 12.0.4 LTS running machine - 10.24.41.121). Is it > mandatory to have Fuel master node as VM? Or can Fuel master node be > physical server as well? If yes, what is the configuration to do the same. > > > > *Configuration change in config.sh:* > > Ø Do we need to configure the physical server IP address (10.24.41.122 > and 10.24.41.123) in config.sh present at 10.24.41.121 (master), so that > while running launch.sh, PXE boot will deploy configuration in 10.24.41.122 > and 10.24.41.123? With existing launch.sh script, 3 slave nodes (VMs) are > getting created in 10.24.41.121. > > > > Ø Do we need to install/configure anything to accommodate physical > servers (10.24.41.122 and 10.24.41.123) as Slave nodes? > > > > Ø Once the query 4) configuration is done, will the master node > (10.24.41.121) discovered automatically in Fuel or do we need to discover > the nodes manually? > > > > *Network Setting tab:* > > > > Ø In Network Settings tab, We have various IP addresses for each > network. With our existing setup above, how can we set our IP addresses and > other details? > > > > *ISO image for Slave nodes:* > > > > Ø Do we need to install same iso image (Mirantis 5.0) in slave nodes > (10.24.41.122 and 10.24.41.123), which we already installed in master node > (10.24.41.121) ? > > > > > > *VDX Device Configuration:* > > > > *interface TenGigabitEthernet 133/0/7* > > *switchport* > > * switchport mode trunk* > > * switchport trunk tag native-vlan* > > * switchport trunk native-vlan 102* > > > > *interface TenGigabitEthernet 133/0/13* > > *switchport* > > * switchport mode trunk* > > * switchport trunk tag native-vlan* > > * switchport trunk native-vlan 102* > > > > *interface TenGigabitEthernet 133/0/21* > > *switchport* > > * switchport mode trunk* > > * switchport trunk tag native-vlan* > > * switchport trunk native-vlan 102* > > > > sw0# show vlan 102 > > VLAN Name State Ports > > (F)-FCoE (u)-Untagged, > (t)-Tagged > > (R)-RSPAN (c)-Converged > > ======== =============== ========================== > ================================================ > > 102 VLAN0102 ACTIVE Te 139/0/13(c) Te > 133/0/24(c) > > Te 133/0/21(t) Te > 133/0/18(c) > > Te 133/0/17(c) Te > 133/0/16(c) > > Te 133/0/14(c) Te > 133/0/13(t) > > Te 133/0/7(t) > > > > > > It would be great if we have Live discussion/meeting to get us clarified. > Please let us know if you are fine with the call and do share us the call > details. > > > > Thanks and Regards, > > Gandhi Rajan > > > -- *Kind Regards* *Miroslav Anashkin**L2 support engineer**,* *Mirantis Inc.* *+7(495)640-4944 (office receptionist)* *+1(650)587-5200 (office receptionist, call from US)* *35b, Bld. 3, Vorontsovskaya St.* *Moscow**, Russia, 109147.* www.mirantis.com [email protected]
-- Mailing list: https://launchpad.net/~fuel-dev Post to : [email protected] Unsubscribe : https://launchpad.net/~fuel-dev More help : https://help.launchpad.net/ListHelp
