i may have missed saying that
the better part of the packets going trough the network had local destinations
like lots of netbios queries, smb and the like with the local machines eth addr and ip addr.
From: Filipe Almeida <[EMAIL PROTECTED]>
To: sammy adedayo <[EMAIL PROTECTED]>
CC: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: [Full-Disclosure] Troubles with Wireless pentest
Date: Mon, 21 Jun 2004 20:00:55 +0100
Hi, First, you should get the mac address of the gateway. This is easy, just look at the destination mac of the outgoing packets or the source mac of incoming packets. Then add a static arp entry of an ip of your subnet with that mac address and use it as the gateway. Traceroute or record route should get you the real ip of the gateway.
Regards, Filipe Almeida http://community.sidestep.pt/~filipe/
----- Original Message ----- From: sammy adedayo <[EMAIL PROTECTED]> Date: Mon, 21 Jun 2004 10:41:28 -0700 (PDT) Subject: [Full-Disclosure] Troubles with Wireless pentest To: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]
A little help would be appreciated on this.
A few problems occurred during a wireless pentest I am presently undertaking. First a foundation,
1) The pentest was a zero knowledge kind, no information was given, in fact we were forbidden to ask for help from any of the staffs
These I found during the first day.
2) The network had a weak point = its wireless network.
3) The wireless network was encrypted but with the weak wep and for a large corporation the data captured was enough to get the key
4) The network in focus is quite large with multiple subnets and lots of �firewalls�
These I did.
5) Using kismet I sniffed a whole lot of packets. And decoded them with the found wep key
6) Then using my conventional ettercap and ethereal I looked through the packets.
Now The Problem.
7) I tried to connect to the net work
8) I used a nice ip to match those on the network
9) Then I used ettercap to try and passively find the gateway but could not
10) I used etterape to watch the packet flow but I could not figure out the gateway from all that traffic
HELP
HOW CAN I GET THE GATEWAY FOR THE WIRELESS NETWORK AND IS THERE ANY WAY I COULD ROUTE PACKETS TO / CONNECT TO/ SCAN THE REST OF THE MACHINES ON THE NETWORK WITH OUT THE GATEWAYS ADDRESS.
OR IS THERE A BETTER WAY TO DO THE WHOLE PENTEST?
Pls help would be gladly appreciated.
Any ideas are welcome. THANKS�
Zippers crips
The Zcrips Inc
-----------------------------------------------------------------
a man is only limited by his imaginative abilities
________________________________ Do you Yahoo!?
Yahoo! Mail - You care about security. So do we.
_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus
_______________________________________________ Full-Disclosure - We believe in it. Charter: http://lists.netsys.com/full-disclosure-charter.html
