|
hi
everyone, i
have been taking on my first large and blind wireless pentest
and i have
nearly become lost in the jaws of a wireless network and would appreciate
any help. first i'lll state
what i have so far done and seen the
network was encrypted but with wep and large traffic
so i was able to bruteforce
the key The
network in focus is quite large with multiple subnets and lots of “firewalls” These
I did. Using
kismet I sniffed a whole lot of packets. And decoded them with the found wep key Then
using my conventional ettercap and ethereal I looked
through the packets. i
sniffed a lot more with ettereal and looked through
them for a similar mac address
but all packets had i local (destination) ip and mac address Now
The Problem. I
tried to connect to the net work I
used a nice ip to match one on the network (8.5)
i changed mac addresses to
match the host i was spoofing. then i tried to route packets to another client which
failed with the network unreachable error i
tried a traceroute to my target client but it failed
too with the same error i
used ettercap to passively watch traffic and came up
with a comprehensive list of
ip/mac addresses and tried to spoof most of them but
still my packets
didn't get routed i
tried using etterape to watch traffic flow and come
up with a route but i figure
out that nearly all traffic was internal most hosts were connecting to
each other HELP: HOW CAN I ROUTE PACKETS THROUGH TO OTHER CLIENTS OR BECOME A CLIENT OR
IS THERE A BETTER WAY I COULD DO THIS WHOLE PENTEST FROM THE BEGINING PLS ANY
HELP WOULD BE APPRECIATED. ZIPPERS
CRIPS _________________________________________________________________ The Zcrips Inc ----------------------------------------------------------------- a man is only limited by
his imaginative abilities |
