That's what we're here for!!! :) Bob Krieger www.FBTutor.com The FuseBox Tutor
----- Original Message ----- From: "R Vosmeer" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, June 10, 2002 8:12 AM Subject: RE: Another cf_secure question > Thanks Bob > > For helping me out here.. > > Roy > -----Oorspronkelijk bericht----- > Van: Bob Krieger [mailto:[EMAIL PROTECTED]] > Verzonden: 10 June 2002 16:12 > Aan: [EMAIL PROTECTED] > Onderwerp: Re: Another cf_secure question > > Roy, > By using the BitOr function, you can basically include as many > groups as > you have. It "should" filter out any duplicate permission you may have. > > Just off the cuff, > Loop through your groups and do a BitOr comparison of the first two > groups. Take the result and do a BitOr on the next group and so on. The > final result should be the composite permission for that individual. > > Good Luck! > > BTW, Let's take this conversation to the fbcommunity list! > > Bob Krieger > www.FBTutor.com > The FuseBox Tutor > > > ----- Original Message ----- > From: "R Vosmeer" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, June 10, 2002 8:03 AM > Subject: RE: Another cf_secure question > > > > Thanks Bob, > > > > I am using multiple permission files so I will place them in the > > circuits and include them there. > > > > I read the document and I see that it is possible to use the BitOr > when > > a user belongs to two usergroups. But is it possible to let the user > > belong to more than two groups?? > > > > -----Oorspronkelijk bericht----- > > Van: Bob Krieger [mailto:[EMAIL PROTECTED]] > > Verzonden: 10 June 2002 15:44 > > Aan: [EMAIL PROTECTED] > > Onderwerp: Re: Another cf_secure question > > > > Roy, > > If you have all your permissions defined in ONE fbx_Permissions > > file, > > you should only need to include it within the ROOT fbx_settings file. > If > > each fbx_Permissions file defines ONLY those premissions used within > > each > > specific circuit, then each one should be included ONLY in that > > particular > > circuit settings file. > > > > Bob Krieger > > www.FBTutor.com > > The FuseBox Tutor > > > > > > ----- Original Message ----- > > From: "R Vosmeer" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Monday, June 10, 2002 7:33 AM > > Subject: Another cf_secure question > > > > > > > Hi, > > > > > > I am setting up a system in which i want to implement the Hal Helms > > > cf_secure tag. I am using the BIT model and the fbx_permissions.cfm > > > file. Where do you people cfinclude this file? I now have it set up > in > > > the settings file of each circuit. Is this correct or is there a > > better > > > way of doing this. > > > > > > Thanks.. > > > > > > Roy > > > > > > > > > > > > > > > > > > > > > > > ==^================================================================ This email was sent to: [email protected] EASY UNSUBSCRIBE click here: http://topica.com/u/?bUrFMa.bV0Kx9 Or send an email to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
