Le Mon, 05 Dec 2016 12:27:46 +1030 [email protected] a écrit:
>Hi, Hi, >I am having trouble getting the discovered network ports automatically >connected to the appropriate Computers they are related to. > >Here is the scenario. I have a small office network with 5 managed >switches (Dell PowerConnect 5548 and Networking N2048, Cisco SG200). >I _think_ I have properly conifgured LLDP on the uplink ports >advertising System Name an System Capabilities. The switches seem to >discover and properly list their neighbours. > >FusionInventory is able to discover the switches and their interfaces, >but the machines registered by the FusionInventory Agents are randomly >mapped to ports all over the place. There are "hubs" connected to >switches' management interfaces and probably half of the machines are >connected to these hubs. The other half of the machines are appearing >on aggregated or physical uplink ports. Only a few machines are mapped >to the physical port they are connected to. >At first I thought the problem might be caused by reused LAG IDs, but >after I switched to unique IDs for the whole network nothing has >changed. I am not experienced with networking beyond this simple >setup, so the trick may be with LLPD or how SNMP is configured. > >I would like to humbly ask the community's help on this issue since >you probably have way more experience in this. I am happy to provide >more information, just let me know whay you need. Check your switches works in LLDP, like run the command to see the neighbour on each switch. David ++ >GLPI version: 9.1.1 >FusionInventory version: 9.1+1.0 >Firmwares: >Cisco SG200: 1.3.7.18 >Dell PowerConnect 5548: 4.1.0.19 >Dell Networking N2048: 6.3.0.9 > >Kind regards, >Mate > >_______________________________________________ >Fusioninventory-user mailing list >[email protected] >http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/fusioninventory-user > _______________________________________________ Fusioninventory-user mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/fusioninventory-user
