Hello all, I'm a newcomer to the FusionPro world and had a question relating to this topic. I've looked at setting up .fpi files, taking out the gutters and bleeds as described, but I'm having a problem. Instead of taking the bleed off the inside edges, FusionPro is overlapping the images, leaving the graphics in the bleed visible along the Top and Left edges of each piece. Is there something I'm needing to do in FPImposer to get it to drop the bleed along all inside edges?
Mac OSX 10.4.10 FusionPro 4.0P1h FPImposer 4.0.10 Acrobat 7Pro 7.0.9 Thanks! -Derek Berdine =)D: Trabon Paris Printing Digital Prepress Technician > Hello Steve, > > If you are using FusionPro 4.x, the Imposition Tool can allow you to = > remove the gutters from your imposed layout. > Just open the Imposition file, click on the "Layout" option, then click = > on the image of the layout. It should reveal > additional options for you to configure the layout as you desire. > > -Alex > > -----Original Message----- > From: Steve Blatman [mailto:[EMAIL PROTECTED] > Sent: Tuesday, October 09, 2007 11:47 AM > To: FusionPro Users Forum > Subject: [fusionpro] imposition & bleed question > > > We have a job that bleeds, but it's the kind of bleed you can set up=20 > as butt cuts (name tags with a wide stripe across the top & bottom,=20 > with type reversed out of it). Any thoughts on how to get Fusion Pro=20 > to impose this with bleeds at the edges of the imposed sheet, but=20 > without bleed gutters (and also without fine white lines at the cuts)=20 > in the middle? +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- Calling all FP Web Users! Do you have a question or lots of knowledge to share about FusionPro Web? If so, join our Printable Web to Print Users' Forum today! Send email to [EMAIL PROTECTED] to find out how! +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
