On 8/11/07 20:33, "Bruce Granath" <[EMAIL PROTECTED]> wrote:
Hi Bruce,
Thanks and keep up the good work
Neill
> Neill,
>
> This should be no problem with FPImposer. Take a look at the FPImposer
> manual located in the Printable directory for more help. I think you'll
> find FPImposer is easy to use plus it has options to work in millimeters
> and contains and a setting to use an SRA3 sheet size. As for Bleed and
> Mark Offset, the Bleed refers to a printed area that is outside the trim
> box. It is typically used to overcome minor inconsistencies that can
> occur during cutting. The Mark Offset refers to the distance away from
> the document that you want the crop marks to appear. Keep in mind this
> measurement changes does not change the actual cutting position.
>
> Bruce
> -----Original Message-----
> From: Neill Mennell [mailto:[EMAIL PROTECTED]
> Sent: Thursday, November 08, 2007 1:48 PM
> To: FusionPro Users Forum
> Subject: [fusionpro] Help for a beginner
>
> Hi Again,
>
> I have created a Business card 85mm x 55mm in Acrobat (From Illustrator)
> and want it to print out 3 across and 7 down on an SRA3 sheet which will
> then be cut on a guillotine. Does Fusion allow me to do this or do I
> need other Imposition software?
> Also what is the difference between Bleed and Mark offset?
> Thx Neill.
>
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
FusionPro 5.0 Now Available!
Variable text on a curve and soft drop-shadows for variable text
LIMITED TIME upgrade offer of $299 per license for current customers:
http://fusionpro.printable.com/store/upgrade
New licenses available for $599 each at:
http://fusionpro.printable.com/store/
All FusionPro 5.0 customers to receive FusionPro 5.1 with
Adobe Acrobat 8 and InDesign CS3 support when released for FREE.
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
--
Users of FusionPro Desktop have unlimited free email support. Contact Printable
Support at [EMAIL PROTECTED]
--
View FusionPro Knowledge Base, FusionPro Samples at
www.printable.com/vdp/desktop.htm
--
You are currently subscribed to fusionpro as: [EMAIL PROTECTED]
To unsubscribe send a blank email to [EMAIL PROTECTED]
--
--
Note: All e-mail sent to or from this address will be received or otherwise
recorded by the e-mail recipients of this forum. It is subject to archival,
monitoring or review by, and/or disclosure to someone other than the recipient.
Our privacy policy is posted on www.printplanet.com
--
