Are you using the Fusion Pro Imposer? Looks like if you are you can click on the imposition and shift the bleed and close the space so it will bust cut. Worth a try. HTH Dawn McAtee Wheeler Ideal Printers, Inc. 713-880-8800 Fax 713-880-8875
> > I am trying to create a template that will impose 24Up (3 Columns - 8 > Rows) Full bleed business cards on a 12 x 18 sheet. I am creating a > template in order for the edges to bleed in order to be cut. For instance, > in the top left card (Column 1- Row 1) I have set the graphic frame to for > bleeding 1/8 of an inch (The frame is w-3.75" x h-2.125"). So far no > problem, the card imposes with bleed to top, left and right side. I do not > want it to bleed off the bottom because the next graphic frame is butted > up to the card above. (This frame is w-3.75" x h-2"). The frames go down > the column with the same width and height until you get to bottom frame > (Column 1- Row 8). It bleeds to the left, bottom and right. So here's the > problem. When the cards impose to create the pdf, ALL cards/frames bleed > on every side, even the cards/frames in the middle (i.e (Column 2- Row 4). > The frames/cards in the middle row (Column 2- Rows 2-7), stay at 3.5" x > 2". The outer cards bleed correctly to the outside, but where a card would > butt up to the next card, it overlaps it. I hope the makes sense but we > need help. > > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- FusionPro 5.0 Now Available! Variable text on a curve and soft drop-shadows for variable text LIMITED TIME upgrade offer of $299 per license for current customers: http://fusionpro.printable.com/store/upgrade New licenses available for $599 each at: http://fusionpro.printable.com/store/ All FusionPro 5.0 customers to receive FusionPro 5.1 with Adobe Acrobat 8 and InDesign CS3 support when released for FREE. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
