This is probably a silly question, but, when you created the pdf, did you check the box that says to use the document bleed settings? When I forget this, the pdf has no bleed to print...
HTH, Steve > Hi everyone, > > I'm not sure if this is a question for the Web to Print forum or the FP > Forum so I'm posting in both... > > I am trying to use FP Imposer to create impositions to be used with the new > imposition feature on the W2P end... > > I built my template at the finished size, loaded the PDF into FP imposer, > added .125" bleed, and entered all necessary information (sheet size, crop > mark spacing, step and repeat info, etc.). I then saved the .fpi file and > tested it by going back into my template in FusionPro, checking the box to > use my imposition definition, and then re-composed. No matter how many > different variations I try, the bleed just will not show up. > > Do I need to export my original document so that my PDF size is .125" larger > on all sides and then set my bleed to 0" in FP Imposer? If so, what is the > point of having the bleed entered into FP Imposer? > > Thoughts? > > Lisa Brooks > Brooks Litho & Digital Group > Steve Blatman Ink Spot Printing & Copy Center, Inc. 14 Church Road, Frazer, PA 19355 USA Tel: 610-647-0776 Fax: 610-647-4560 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- FusionPro 5.0 Now Available! Variable text on a curve and soft drop-shadows for variable text LIMITED TIME upgrade offer of $299 per license for current customers: http://fusionpro.printable.com/store/upgrade New licenses available for $599 each at: http://fusionpro.printable.com/store/ All FusionPro 5.0 customers to receive FusionPro 5.1 with Adobe Acrobat 8 and InDesign CS3 support when released for FREE. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
