That's probably your problem because the default minimum is 6 - so it can't
shrink very much. You'll want to go into the rules dialog and edit the
OnCopyFit rule. The first line will look something like this:
if (!Copyfit(new MagnifyAttributes("text", 25, 400, 6, 72)))
The number 6 is the minimum point size it will shrink to. So you can change
this to whatever minimum size you want. (fyi: The 25 means it will shrink to a
minimum of 25% of the original point size). Click OK and see if that helps.
-Lauren
-----Original Message-----
From: Dawn McAtee [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 21, 2007 9:36 AM
To: FusionPro Users Forum
Subject: [fusionpro] RE: Copy fit
It is 6.5
Where do I change the default
>
> What is the original size of the email address text that you have in the
> frame? It is possible that if it is small, that you'll need to lower the
> minimum shrinkage default in the OnCopyFit rule.
>
>
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Calling all FP Web Users!
Do you have a question or lots of knowledge to share about FusionPro Web?
If so, join our Printable Web to Print Users' Forum today!
Send email to [EMAIL PROTECTED] to find out how!
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
--
Users of FusionPro Desktop have unlimited free email support. Contact Printable
Support at [EMAIL PROTECTED]
--
View FusionPro Knowledge Base, FusionPro Samples at
www.printable.com/vdp/desktop.htm
--
You are currently subscribed to fusionpro as: [EMAIL PROTECTED]
To unsubscribe send a blank email to [EMAIL PROTECTED]
--
--
Note: All e-mail sent to or from this address will be received or otherwise
recorded by the e-mail recipients of this forum. It is subject to archival,
monitoring or review by, and/or disclosure to someone other than the recipient.
Our privacy policy is posted on www.printplanet.com
--
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Calling all FP Web Users!
Do you have a question or lots of knowledge to share about FusionPro Web?
If so, join our Printable Web to Print Users' Forum today!
Send email to [EMAIL PROTECTED] to find out how!
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
--
Users of FusionPro Desktop have unlimited free email support. Contact Printable
Support at [EMAIL PROTECTED]
--
View FusionPro Knowledge Base, FusionPro Samples at
www.printable.com/vdp/desktop.htm
--
You are currently subscribed to fusionpro as: [EMAIL PROTECTED]
To unsubscribe send a blank email to [EMAIL PROTECTED]
--
--
Note: All e-mail sent to or from this address will be received or otherwise
recorded by the e-mail recipients of this forum. It is subject to archival,
monitoring or review by, and/or disclosure to someone other than the recipient.
Our privacy policy is posted on www.printplanet.com
--
