Comments below:
On Aug 29, 2007, at 1:59 AM, [EMAIL PROTECTED] wrote:
What’s happening: When preparing for output choosing Postscript
direct to
printer. The print driver has been preconfigured to print booklets.
But
What print driver? If you compose directly to PostScript file or to
press via PS, then no driver is in the middle.
when Composing the file flat one sided sheets are what’s is
printed. Also
tried saving as a PDF and then printing. It prints 1 big book. Also I
created a direct print hot folder and tried sending ps, pdf and
also tried
to out put multiple files. The result was the same as before with the
addition of the out put multiple file would print one file
correctly and
then stop and wait for the next book to spool up. Well if you
have any
ideas I would appreciate it.
I am a bit surprised that sending separate files did not work. Are
you setting the defaults for the print queue on the press to do
booklets?
The other approach it seems you have not tried yet is to inject
specific PostScript Commands into the output stream. Achieving
booklets in this fashion can be hard or impossible depending on what
your press. You can sometimes get a clue by looking at the PPD for
that particular press. Its my understanding from looking at the PPD
that the KonicaMinolta 1050 has these capabilities.
So, here is what you can try:
1. Create a text file in the same directory as your FusionPro
document with the following:
<< /Collate true >> setpagedevice
<< /Layout 1 >> /KMOptions /ProcSet findresource /setKMoptions
get exec
2. Open your FusionPro Document
3. Compose, Choose Postscript, Save, Cancel
4. Advanced -> Page Media Select that text file for the start of
"Page 1"
Then you should compose to one file and see if it works.
-- Brian Ray
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Calling all FP Web Users!
Do you have a question or lots of knowledge to share about FusionPro Web?
If so, join our Printable Web to Print Users' Forum today!
Send email to [EMAIL PROTECTED] to find out how!
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
--
Users of FusionPro Desktop have unlimited free email support. Contact Printable
Support at [EMAIL PROTECTED]
--
View FusionPro Knowledge Base, FusionPro Samples at
www.printable.com/vdp/desktop.htm
--
You are currently subscribed to fusionpro as: [EMAIL PROTECTED]
To unsubscribe send a blank email to [EMAIL PROTECTED]
--
--
Note: All e-mail sent to or from this address will be received or otherwise
recorded by the e-mail recipients of this forum. It is subject to archival,
monitoring or review by, and/or disclosure to someone other than the recipient.
Our privacy policy is posted on www.printplanet.com
--
