Hi all,
I install Checkpoint R55W to my Sun V240 server. It seems that the
Checkpoint do not accept the bge interfaces on the V240. I did add the bge
accept to the fw.boot/ifdev already. Below is the log:
SunOS Release 5.8 Version Generic_117350-02 64-bit Copyright 1983-2003 Sun
Microsystems, Inc. All rights reserved.
Hardware watchdog enabled
FireWall-1 boot security configuration:
FW-1: Disabling IP forwarding
FW-1: Loading default filter
FW-1: driver installed
FW-1: Default filter installed successfully
FW-1: Loading I/F device list: le qe qfe hme ipdptp ge eri ce bge sppp
FW-1: Starting bootd: fwbootd: child pid=21
FW-1: Autopushing under UDP
FW-1: Autopushing over network interface drivers
FW-1: Autopushing over le
FW-1: Autopushing over qe
FW-1: Autopushing over qfe
FW-1: Autopushing over hme
FW-1: Autopushing over ipdptp
FW-1: Autopushing over ge
FW-1: Autopushing over eri
FW-1: Autopushing over ce
FW-1: Autopushing over bge
ap: ioctl failed: Out of stream resources
FW-1: bge autopush failed: resetting ...
Usage:
ap -a drv minor last-minor mod [mod ...]
add: last-minor = 0 means one and not range
minor = -1 means all
ap -r drv minor
remove: minor should be in range (0 for all)
ap -g drv minor [ place mod [mod ...]]
get: minor should be in range (0 for all)
prints arguments for add command
place specifies where to insert mod
See also autopush(1M)
Other options:
ap -e drv mod
query: check if mod is already autopushed over drv
ap -g: ioctl failed (0): No such device
FW-1: Autopushing over sppp
ap: ioctl failed: Out of stream resources
FW-1: sppp autopush failed: resetting ...
Usage:
ap -a drv minor last-minor mod [mod ...]
add: last-minor = 0 means one and not range
minor = -1 means all
ap -r drv minor
remove: minor should be in range (0 for all)
ap -g drv minor [ place mod [mod ...]]
get: minor should be in range (0 for all)
prints arguments for add command
place specifies where to insert mod
See also autopush(1M)
Other options:
ap -e drv mod
query: check if mod is already autopushed over drv
ap -g: ioctl failed (0): No such device
configuring IPv4 interfaces:FW-1: i/f bge0 (bge0) is not found in table
(SIOCSLIFNETMASK 8078697e)
Warning: this interface is not monitored by FireWall-1
FW-1 IP: FW-1 has a problem registering an interface configuration
command (8078697e) - blocked.
NOTICE: bge0: link down
Do anyone see that error ? Please help.
Best regards,
Aiggno
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to [EMAIL PROTECTED]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[EMAIL PROTECTED]
=================================================
