I ran into the same thing with a pair of 350's that were scratch installed with 3.9 and R60, 1 unit showed the option in voyager while the other did not. This may/may not apply for you...entering the link below did show the accelerator option and it was enabled there.
-GS enter the following Voyager configuration page in a web browser and enable the accelerator if possible? The link is http://<ip-address>/cgi-bin/ubsec_config.tcl?package=/opt/CPsuite-R60/fw 1 Question...." Could you clarify? With the 350 it comes with an onboard accelerator that is non-configurable, with the 380 you can have an additional accelerator card installed along with the onboard accelerator, only then should you see any option in voyager for the accelerator. Am I way off base? When should we see the option for the accelerator in voyager?" Answer....You are correct about the accelerator that is onboard the IP350 & IP380. However, the accelerator options will appear for both IP350 & IP380. As it is, there are 2 drivers for the Boardcom accelerator card that you have, Luna & SecureXL API. If you have activated the Luna API for the accelerator card, the option will appear in Voyager. However, if you had turned on SecureXL, SecureXL will take over the Luna API functionality as SecureXL is much faster than Luna. If this is the case, the option will disappear from Voyager. -----Original Message----- From: Mailing list for discussion of Firewall-1 [mailto:[EMAIL PROTECTED] On Behalf Of cisco4ng Sent: Wednesday, November 15, 2006 2:49 PM To: [email protected] Subject: Re: [FW-1] VPN acceleration card on IP380 and IPSO4.1 build 19 This is the Nokia so I dont' think Performance Pack applied here. In anyway, here is the output from "manage packages": [input] On [input] Off Check Point VPN-1 Pro/Express NGX R61 (Mon Mar 6 10:56:42 IST 2006 Build 602000207) /opt/CPsuite-R61 Applications Enable Package Name Directory [input] On [input] Off Check Point R55W Compatibility Package for NGX (Tue Jan 10 08:24:05 IST 2006 Build 602000102) /opt/CPR55WCmp-R61 [input] On [input] Off Check Point CPinfo (Thu Dec 22 14:03:00 IST 2005 Build 911000031) /opt/CPinfo-10 [input] On [input] Off R55 Compatibility Package for NGX (Sun Feb 19 13:55:17 IST 2006 Build 602000103) /opt/CPngcmp-R61 [input] On [input] Off Check Point Eventia Reporter NGX R61 (Sun Feb 19 02:58:02 IST 2006 Build 602000183) /opt/CPrt-R61 [input] On [input] Off Check Point UserAuthority Server NGX R61 (Thu Feb 2 19:49:41 IST 2006 Build 602000106) /opt/CPuag-R61 [input] On [input] Off Check Point VSX NGX Compatibility Package for VSX NGX (Sun Feb 5 16:53:17 IST 2006 Build 602000104) /opt/CPvsxngxcmp-R61 [input] On [input] Off IPRG Unsupported tools Juan Concepcion <[EMAIL PROTECTED]> wrote: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 You have performance pack off correct? Juan cisco4ng wrote: > All, > can someone explain this to me? > I have an IP380 running IPSO 4.1 build 019 with NGx R61 with HFA_01. This IP380, > as I understand it, has a built-in VPN acceleration card which I can see from Voyager. > I enable the VPN acceleration card via voyager under "crypto hardware acceleration", > repush the policy and reboot the IP380. In voyager, it tells me that the vpn accleration > card model is "/dev/hwa0 5802" > > I have a site-to-site VPN from this IP380 to another Nokia IP710 running NG Feature > Pack 3 with HFA_327. The site-to-site VPN is "3des/MD5 with DH group 2". > > The VPN is working fine but when I go into "cryptographic hardware accleration > statistics", I see nothing but zero. This was NOT the case when the IP380 is > running IPSO 3.7.1 build 025 with NG Feature Pack 3 HFA_327. I can see the > packets being processed by the vpn accleration card. > > Does it it mean that ipso4.1/NGx R61 will ignore the built in vpn acceleration card on > the IP380? What am I missing here? I understand that the built-in will NOT support > AES-256 but I am using 3DES/MD5 but it does work in IPSO 3.71. build 25 with NG > Feature Pack 3 HFA_327 so I must be missing something here. > > Please help. > > cisco4ng > > > > > --------------------------------- > Sponsored Link > > $420,000 Mortgage for $1,399/month - Think You Pay Too Much For Your Mortgage? Find Out! > > ================================================= > To set vacation, Out-Of-Office, or away messages, > send an email to [EMAIL PROTECTED] > in the BODY of the email add: > set fw-1-mailinglist nomail > ================================================= > To unsubscribe from this mailing list, > please see the instructions at > http://www.checkpoint.com/services/mailing.html > ================================================= > If you have any questions on how to change your > subscription options, email > [EMAIL PROTECTED] > ================================================= > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFW2ea5MTluexDZhIRAucWAKCZoMcdukJ7TVJLnlDQQpgbBf8TcQCgwVf1 on3xtrXyRZrAJvVO35Z91CI= =+cYk -----END PGP SIGNATURE----- ================================================= To set vacation, Out-Of-Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] ================================================= --------------------------------- Sponsored Link Mortgage rates as low as 4.625% - $150,000 loan for $579 a month. Intro-*Terms ================================================= To set vacation, Out-Of-Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] ================================================= ================================================= To set vacation, Out-Of-Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] =================================================
