Hi Guys 1. Securemote would not work from behind a proxy (we have tried it quite some time back). It needs certain ports to be open on the proxy. See attached Doc which says
******************************************* SecuRemote from Behind a Proxy Server Q:I need to allow SecuRemote access to clients who are behind a Microsft Proxy server and must use the Proxy server to get to the Internet. How can I make this work? A: You can't. SecuRemote can not be used through a proxy server. The TCP connection isn't usually the problem, it's the UDP connection that needs to occur on port 259 and the IP protocol 94 packets. I don't know of a proxy server that handles either one of these in a way that is compatible with SecuRemote. **************************************** 2. Load Securemote on the machine with the broadband connection, this way it will encrypt the entire traffic which is destined for Secure network from the LAN or from the gateway machine. Let me know if this has helped. Rgds Satish - Asst Manager Hughes India -----Original Message----- From: Mailing list for discussion of Firewall-1 [mailto:[EMAIL PROTECTED]]On Behalf Of Blake Updyke Sent: Tuesday, November 26, 2002 5:08 PM To: [EMAIL PROTECTED] Subject: Re: [FW-1] Satellite Broadband issues with SecuRemote I am currently working with a user that is using Starband satellite broadband. We are currently having a problem getting Secure Remote to work through the WinProxy that comes with the satellite. So my answer is, check to see if they use a WinProxy or acceleration software with the satellite connection. You could have problems. I will leave a post if I figure out how to get it working. Good luck. Blake Updyke Network Security Administrator Meridian Automotive Systems, Inc. Shahkamal Shah <[EMAIL PROTECTED]> Sent by: Mailing list for discussion To: of Firewall-1 [EMAIL PROTECTED] <[EMAIL PROTECTED] cc: point.com> Subject: [FW-1] Satellite Broadband issues with SecuRemote 11/26/2002 05:59 AM Please respond to Mailing list for discussion of Firewall-1 Hi, Thanks in advance for all your kind suggestions, we are thinking of using SecuRemote over Satellite Broadband are there any issues I should be aware of. I have following stats from ISP Download Speed Through Satellite = 1.5 MBits Upload Speed Through 56K Modem = 56K Ping Time = 2 x 400 ms Thank You Shahkamal Shah UK Network Manager http://www.abcaz.com Part of the Abcaz Group Ltd. This message is for the use of the named person only and may contain confidential, proprietary or legally privileged information. No confidentiality or privilege is waived or lost by any mistransmission. If you received this message in error, please delete it and all copies from your system immediately, destroy any hard copies of it and please notify the sender. Abcaz Limited reserves the right to monitor all e-mail communications through its networks. Any views expressed in this message are those of the individual sender, except where the message states otherwise and the sender is authorized to state them to be the views of any such entity. Please note that it is your responsibility to scan any attachments for viruses. This communication is from Abcaz Limited, whose offices are at Suite A, Swan Court, Swan Street, Old Isleworth, TW7 6RJ, United Kingdom. Tel: +44 (0)20 8326 7000. ================================================= To set vacation, Out Of Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] ================================================= ================================================= To set vacation, Out Of Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] ================================================= ================================================= To set vacation, Out Of Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] =================================================
