Yep.. THe machine we are using has scsi on board, although it's not
compiled into the kernel, as we don't have any scsi devices installed.
When I get back to work I'll check the exact revision.. I know it's the
default install off of the CP2000 CD.
The other problems we encountered were the S01fw1boot.. welll duh that
can't load before networking loads, or it crashes.
The script they have in there, errors on setting those two smp variables,
take out the spaces and they seem to set fine.
On Fri, 26 May 2000, Steve Babb wrote:
>
>
>
> >
> > Hi Steve,
> >
> > though I�m running on SuSE Linux 6.3 (Kernel 2.2.13) maybe my experience
> can
> > help you to determine the Problem.
> >
> > FW-1 (41603) is running on Intel Motherboard L440GX+ (Dual-Pentium) with 2
> > PIII/500 and Adaptec-SCSI (on board).
> >
> > Except for minor problems at boot time (fw1boot script) it�s working with
> a
> > SMP kernel.
> >
> > Do you both get these kernel panics with a standard kernel (with Redhat)?
>
> With the smp it won't work at all, but with the standard kernel it crashes
> about 10 times a day...
>
> I just can't figure it :-(
>
> Steve
>
>
>
> ================================================================================
> To unsubscribe from this mailing list, please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> ================================================================================
>
Erik Parker
[EMAIL PROTECTED]
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
