To those that can help me,
I am trying to get my company laptop to connect to my corporate Intranet and
I'm having some problem with the Secure Remote client working through my
Linksys Router. I've checked at phoneboy.com for any suggestions, but I must
not have found the exact situation, since I can configure the laptop to be a
DMZ host, I'm confused and I think I've run into a routing problem. I've
tried dialing with a modem, (Secure Remote was installed on all adapters)
and when using a modem, everything works fine. So what am I doing wrong on
the cable modem setup?
The Basics:
Software Versions:
Laptop, WIndows 95
Secure Remote 4.005
Hardware:
Linksys BEFSR41 Router
3Com PCMCIA 10/100 Netcard
Network configuration:
Router - (Internet Cloud ISP address 24.4.x.x)
|
192.168.1.1 (internal ip of router)
|
Laptop 192.168.1.101
Router is configured to allow 192.168.1.101 to function as a DMZ host. All
UDP/TCP traffic from the internet ip address is passed to Laptop.
Secure remote is configured with Site ip address. Laptop can ping the site.
Network setting and Bindings:
(adapter)3Com 3C574-TX- FW1 Protocol -> 3Com 3C574-TX Fast Ethernet PC card
is checked under bindings
(adapter)FW1(3Com 3c574-TX)- TCP/IP -> FW1(3Com574-TX) is checked
(protocol)FW1 Protocol -> 3C574-TX (nothing is checked, if one is checked,
the check removed)
(protocol)TCP/IP -> ip setting are listed, (dhcp,dns, etc..)
DNS is set that the internal company DNS servers are used first, then I fall
back to my ISP's DNS servers.
Route Table on Laptop:
Network Address Netmask Gateway Address Interface
Metric
0.0.0.0 0.0.0.0 192.168.1.1
192.168.1.101 1
127.0.0.0 255.0.0.0 127.0.0.1
127.0.0.1 1
192.168.1.0 255.255.255.0 192.168.1.101
192.168.1.101 1
192.168.1.101 255.255.255.255 127.0.0.1
127.0.0.1 1
192.168.1.101 255.255.255.255 182.169.1.101
192.168.1.101 1
224.0.0.0 224.0.0.0 192.168.1.101
192.168.1.101 1
255.255.255.255 255.255.255.255 192.168.1.101
0.0.0.0 1
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
