I want to thank everyone who helped out with this.  I managed to get FW-1
4.1sp1 working with the FORE ATM driver by using version 5.0 of the FORE
drivers.

These drivers are quite a bit different to setup and install than the 4.1
drivers so it took me sometime to get the interface working properly.  But
once that was done, a fresh install of 4.1sp1 worked like a charm.  Sorry,
I did not try an upgrade.  I suspect that 4.0sp5 may not work with ATM
5.0.

Thanks,
Wayne

> -----Original Message-----
> From: Wayne McCormick [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, June 06, 2000 11:02 PM
> To: [EMAIL PROTECTED]
> Subject: [FW1] Problems with FW-1 4.1sp1 and Fore ATM
> 
> 
> 
> 
> I am trying to run FW-1 4.1sp1 on Solaris 2.6 (Ultra 5). I have a FORE ATM
> card installed with version 4.1 of the drivers.
> 
> What has conspired so far:  I can get the ATM card to work under FW-1 3.x 
> and 4.0sp5.  If I upgrade from 4.0sp5 to 4.1sp1 or blow it all away and do
> a fresh install I get the same result.  A reboot will result in this
> message being printed during the fw1boot phase:
> 
> FW-1: fwstrmodwput: loading default filter on hme0 (1)
> FW-1: i/f qaa0 (qaa0) is not found in table (80206910)
>      WARNING: this interface is not monitored by FireWall-1
> FW-1 IP: FW-1 has a problem registering an interface configuration
>          command (80206910) - blocked.
> 
> After that, it just sits there forever.  The first line is normal, then
> next two are the clincher.  If I boot from CD and remove
> /etc/rcS.d/S25fw1boot, the machine will come up and I can ping addresses
> over the ATM, but when I run ifconfig -a, it panics.  And of course, the
> FW won't monitor that interface anyway.
> 
> Has anyone else seen this problem before?  How did you fix it?
> 
> Thanks,
> Wayne
> 
> 
> Wayne McCormick                 | GECITS                | Quomodo
> Senior UNIX Analyst, Team Leader| 900, 815 - 8th Avenue |  Arduum
> [EMAIL PROTECTED]         | Calgary, AB           |    Esse
> [EMAIL PROTECTED]              | T2P 3P2               |  Possit.
> Phone: (403) 205-5631           | Fax: (403) 266-6889   |
> 
> 
> 
> 
> ============================================================================
> ====
>      To unsubscribe from this mailing list, please see the instructions at
>                http://www.checkpoint.com/services/mailing.html
> ============================================================================
> ====
> 



================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================

Reply via email to