Hi
We keep getting "Too Many Internal Hosts Detected" from one of our remote
firewall (50 Node license).
We have DHCP running on the site but there should be less than 40 active
devices at any one time.
We have been advised in the past to clear the DHCP database and reboot
firewall - it seems to clear up but then starts again !
Any other ideas on how we could cure this (and no emails from CP suggesting
upgrade to Enterprise at all sites ! ;-)
Cheers
Tim Higgins
#**********************************************************************
This message is intended solely for the use of the individual
or organisation to whom it is addressed. It may contain
privileged or confidential information. If you have received
this message in error, please notify the originator immediately.
If you are not the intended recipient, you should not use,
copy, alter, or disclose the contents of this message. All
information or opinions expressed in this message and/or
any attachments are those of the author and are not
necessarily those of Hughes Network Systems Limited,
including its European subsidiaries and affiliates. Hughes
Network Systems Limited, including its European
subsidiaries and affiliates accepts no responsibility for loss
or damage arising from its use, including damage from virus.
#**********************************************************************
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
