With FW4.1 sp0 i have had no problem with setting this up (i did not know it
was ident, so set up an additional resource)
In my case I was wanting to test the T1 microwave link we have.
I successfully and repeatedly downloaded 20mb files
Higher link speed may perhaps be an issue?
Before I knew we needed this ident rule set up, the ftp session would
connect and then after a time timeout (30 to 60 sec)
Teh ftp session was anonymous , but we did have to set the ident rule up
even to make aonymous work.

cheers
deanc


-----Original Message-----
From: Steve Smith [mailto:[EMAIL PROTECTED]]
Sent: Thursday, 29 June 2000 2:32 PM
To: Larry Wu; [EMAIL PROTECTED]
Subject: Re: [FW1] FTP through FW-1 with NAT



>

My support people have told me that older FTP servers using IDENT are a
problem for FW-1.  I don't know what version this started with, but I am
seeing quite a bit of FTP problems that are similar happening for version
4.1 SP1.

Steve

> Larry Wu wrote:
>
> I am currently using FW-1 with NAT for all out going internet traffic. I'm
having problems accessing the FTP server on our ISP. From the log I see my
initial ftp connection passing through but the return message is dropped.
The service that the returned message is 'ident', a predefined service for
port 113.  I then create a rule to allow this 'Ident' service to pass thru.
The log shows it is accepted but I still cannot access the FTP site. I have
no problems accessing other FTP sites. But most sites I do download from
allow anonymous sessions. Has anyone encountered this type of problem? Any
help will be much appreciated.
>
> Larry



============================================================================
====
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
============================================================================
====
***************************************************
This e-mail is  not an  official  statement of  the
Waikato  Regional  Council unless otherwise stated.
Visit our website http://www.ew.govt.nz
***************************************************


================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================

Reply via email to