Joe,
Private Net NAT(hide) --- FW1 ----Internet---- FW1--- NAT(hide)
>> Private Net
Are you using Hide NAT to the External Interface or other Valid IP ?
Is the Encryption/Decryption taking place at the Valid IP or Private Network ?
Sould the Encryption domain for each network be the External or Valid IP or
the Private Network.
This is a FW-1 Gateway VPN-1 to FW-1 Gateway VPN-1
Thanks
Darly
At 02:33 PM 7/11/2000 -0400, Joe Voisin wrote:
>I am using IKE with 3DES/MD5 no problem through my LinkSys NAT Router...
>Will not work with FWZ encryption. I would also think that your router/NAT
>would have to support IPSec to some degree.. even if it's just IPSec
>Passthru...
>
>I haven't played with this with other NAT based routers but I would think
>that the same applies...
>
>> -----Original Message-----
>> From: Darly Coupet [mailto:[EMAIL PROTECTED]]
>> Sent: Tuesday, July 11, 2000 2:23 PM
>> To: "Firewall-1 (E-mail)"@onus.us.checkpoint.com;
>> [EMAIL PROTECTED]
>> Subject: [FW1] VPN - NAT and Encryption
>>
>>
>>
>> Firewallers,
>>
>> Does Firewall 4.1 support the following configuration?
>>
>> Private Network NAT --- FW1 ----Internet---- FW1--- NAT
>> Private Network
>>
>> Can I use Hide NAT for each private network?
>>
>> What is the recommended encryption methods?
>>
>> Thanks for your comments.
>>
>> Darly
>>
>>
>> ==============================================================
>> ==================
>> To unsubscribe from this mailing list, please see the
>> instructions at
>> http://www.checkpoint.com/services/mailing.html
>> ==============================================================
>> ==================
>>
>
>
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
