"Meacle, Michael A" <[EMAIL PROTECTED]> wrote:
>Date: Tue, 15 Aug 2000 08:18:35 +1000
>Christine,
>(b) Maybe CP-FW1 handles multicast differently
> e.g. RIP1 uses directed broadcast (from memory) and has no
>concept of authentication of messages
> RIP2 uses multicast 224.0.0.[very low about 9] (from memory)
>
>catcha
>Mick Meacle,
Hi Mick,
Very normal network, believe it or not. Switches work fine, nothing crazy.
Problem is not accepting RIP, it's sending it w/ NAT address. Don't know what
the funk is with RIP2, don't know gated source code that well. rip1 broadcast;
rip2 multicast to 224.0.0.9, all that is in arp table, fine & good.
Want to do the phoneboy's NAT to specific IF but having problem with
syntax. fwxlconf tells me I have syntax errors
fwx_translation_kenny={
<0, 192.168.10.0, 192.168.10.255, FWXT_HIDE, 204.32.38.10, 0>
};
<> qfe0@kenny
set sr15 fwx_translation_kenny;
Does it not like blank lines? white spaces? Do I have to restart fw when
I modify xlate.conf? What's this about kenny being defined as a host? I
thought the <> means eitherbound, so do I just use < if I want outbound
only? Life is short, FW1 is long.
CT
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
