You got it bro.

----- Original Message ----- 
From: "Jarmoc, Jeff" <[EMAIL PROTECTED]>
To: "Scott Schindler" <[EMAIL PROTECTED]>
Sent: Tuesday, August 29, 2000 10:37 AM
Subject: RE: [FW1] VPN Between Two Illegal Networks


> Just out of curiousity, what could you do to get around the illegal
> networks
> being the same?  The only thing that comes into my mind is to place a
> router
> between the network and the firewall and nat there, then nat again at
> the
> firewall.. messy
> 
> -----Original Message-----
> From: Scott Schindler [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, August 29, 2000 10:16 AM
> To: Steve; [EMAIL PROTECTED]
> Subject: Re: [FW1] VPN Between Two Illegal Networks
> 
> 
> 
> That is the default for IKE steve.  You don't need to do anything
> special
> when using IKE because it tunnels.  FWZ would cause a little more work.
> 
> However the two illegal networks cannot have the same addressing scheme
> or
> you have more NAT work to do on routers.
> 
> ----- Original Message -----
> From: "Steve" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, August 29, 2000 9:40 AM
> Subject: [FW1] VPN Between Two Illegal Networks
> 
> 
> >
> >
> > Hi,
> >
> > Is it possible to set up a VPN between two illegal internal networks
> > that
> > routes across the Internet?
> >
> > Example:
> >
> > netA -- (le0) FWmachineA (le1) -- internet -- (le1) FWmachineB (le0)
> --
> > netB
> >
> >
> > Where:
> >
> > netA is an illegal internal network
> > netB is an illegal internal network
> >
> > FWmachineA le1 has a valid Class C IP address
> > FWmachineB le1 has a valid Class C IP address
> >
> > With an encrypted VPN how does a host on netA route to a host on netB
> > (without using NAT - not enough class C addresses available)?
> >
> > Cheers,
> >
> > -Steve
> >
> >
> >
> >
> >
> ========================================================================
> > ========
> >      To unsubscribe from this mailing list, please see the
> instructions
> > at
> >                http://www.checkpoint.com/services/mailing.html
> >
> ========================================================================
> > ========
> 
> 
> ========================================================================
> ====
> ====
>      To unsubscribe from this mailing list, please see the instructions
> at
>                http://www.checkpoint.com/services/mailing.html
> ========================================================================
> ====
> ====


================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================

Reply via email to