If the request is coming from a remote subnet it will probably not be a
broadcast. Both DCHP relay agents and Router IP-Helpers will usually change
the broadcast for a unicast directed at a dhcp server. You can configure the
IP helper to get passed to a broadcast address but it is more likely that
the request is coming from on-segment. I would do as below, look at the
request on an analyzer and find ot the manufacturer and go looking at
machines!
Hope it helps
Russell Goodwin
-----Original Message-----
From: CryptoTech [mailto:[EMAIL PROTECTED]]
Sent: 02 November 2000 14:24
To: Brock Bruner
Cc: [EMAIL PROTECTED]
Subject: Re: [FW1] Bootp (Probably been asked before)
Only if you are forwarding in dhcp requests from remote networks. Have you
run a
sniffer trace? This will give you the mac address so you can check the
manufacturer
through http://coffer.com/mac_find/ , or http://www.shmoo.com/tools/mac/ ,
or the
IEEE doc at http://standards.ieee.org/regauth/oui/oui.txt
HTH
CryptoTech
Brock Bruner wrote:
> No printers either. Can the DHCP Relay in NT have anything to do with
this?
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, October 31, 2000 7:40 PM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: RE: [FW1] Bootp (Probably been asked before)
>
> Do you have printers on a novell box? If you didn't configure jetdirects
> they will just sit there and broadcast...
>
> eric.
>
> On Tue, 31 October 2000, Brock Bruner wrote:
>
> >
> >
> > Not the case. No DHCP clients on this network.
> >
> > -----Original Message-----
> > From: Brian Mulford [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, October 31, 2000 1:50 PM
> > To: 'Brock Bruner'
> > Subject: RE: [FW1] Bootp (Probably been asked before)
> >
> >
> > probably clients booting up and broadcasting for a DHCP/BOOTP server.
> >
> > -----Original Message-----
> > From: Brock Bruner [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, October 31, 2000 3:35 PM
> > To: Checkpoint E-Mail List (E-mail)
> > Subject: [FW1] Bootp (Probably been asked before)
> >
> >
> >
> > I am seeing a lot of bootp entries in my logs and I don't know where
they
> > are coming from. Can someone please help? I am running Checkpoint 4.1
SP1
> on
> > Windows NT Server 4.0 (SP6a).
> >
> >
> >
>
============================================================================
> > ====
> > To unsubscribe from this mailing list, please see the instructions
at
> > http://www.checkpoint.com/services/mailing.html
> >
>
============================================================================
> > ====
> >
> >
> >
>
============================================================================
> ====
> > To unsubscribe from this mailing list, please see the instructions
at
> > http://www.checkpoint.com/services/mailing.html
> >
>
============================================================================
> ====
>
>
============================================================================
====
> To unsubscribe from this mailing list, please see the instructions at
> http://www.checkpoint.com/services/mailing.html
>
============================================================================
====
============================================================================
====
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
============================================================================
====
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
