David,
I just recently upgraded from NT4.0 SP4 firewall 4.0 SP3. I first upgraded
to NT4.0 SP5 and then upgrade to firewall-1 v4.0 SP5 (SP5 for v4.0 is on
the v4.1 CD). I then installed v4.1 along with SP1 for both the fw module
and mgmt module. (this is automatic) I then upgraded both the FW and mgmt.
to SP3. I too have both the FW module and mgmt. module on 1 machine.
Granted, I do not have an elaborate rules base, but I am not having any
problems at all.
Hope this helps, and if you have any more questions, please feel free to
E-mail me directly.
Stewart
STEWART RAE
Network Manager
Guthrie Healthcare System
(570) 882-5374 Voice
(570) 882-6874 Fax
03/02/2001 09:51:17 AM
"Dame, David"
<[EMAIL PROTECTED]> To:
[EMAIL PROTECTED]
Sent by: cc:
[EMAIL PROTECTED] Subject: [FW1]
Firewall-1 Upgrade
kpoint.com
02/28/2001 12:55 PM
I will be upgrading our NT4.0 SP4 firewall tomorrow. The firewall is at
version 4.0 sp1. I recently upgraded the firewall from 3.0b with no
problems. I thought that I read somewhere that the 4.0 firewall had to be
at sp7 before I could upgrade to 4.1 sp2. After reading the documentation
it seems that the wrapper takes care of this, meaning that I can upgrade to
4.1 in one shot. I am assuming that the wrapper is the install program
that automatically pops up when I insert the CD. We only have one firewall
and the management console is on the same box . So does this all seem
correct and are there any other issues I should look out for?
Thanks,
Dave
MCSE
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
