RE: [FW1] Multiple subnets behind a FW1/VPN-1 problem connecting to subnets

[Jim Sweeting]

Are you encapsulating the Securemote traffic ? The alternative is to use NAT or, (I believe) IP Pools   Jim   ================================================================== Jim Sweeting                            Consultant Optimation NZ Ltd 43 College Hill Road PO Box 106104 Auckland                    d.             +64 9 307 5566 p.             +64 9 309 7918 f.              +64 9 309 7919 m.            +64 25 582047 e.             [EMAIL PROTECTED]   This e-mail contains proprietary information some or all of which may be legally privileged. It is for the intended recipient only. If you receive this email in error, please notify the sender immediately and permanently delete this email. If you are not the intended recipient you must not use, disclose, distribute, copy or print this e-mail.   -----Original Message----- From: Sergio Perez [mailto:[EMAIL PROTECTED]] Sent: Sunday, 4 March 2001 1:12 p.m. To: [EMAIL PROTECTED] Subject: [FW1] Multiple subnets behind a FW1/VPN-1 problem connecting to subnets   Probably a stupid question but can anyone help with this? Secure Remote Client | | Internet | | Firewall-1/VPN-1 | | Subnet 1* | | Subnet 2 | Subnet 3 ... * Internal Interface on Firewall is part of Subnet 1 Firewall itself can reach any subnet, internal clients can reach any subnet. VPN client can get to subnet 1 but is not able to reach any other subnet, appears as though the client does not know that those subnets reside behind the firewall, ideas?