UDP
500 packets are returning from the secure remote firewall I am trying to
reach.
I am
able to connect as long as I do not NAT the SecuRemote
users.
NATing
on the Client Side. This same
client works on another Firewall system but they are using 4.1 SP2 on
Nokia.
Thanks
Steven
-----Original
Message-----
From: Gibson,
Brian [mailto:[EMAIL PROTECTED]]
Sent: Friday, March 09, 2001 9:25
AM
To: 'Steven Zimmerman';
Fw1 Mailing List (E-mail)
Subject: RE: [FW1] Secure Remote and NAT
issues
When you say you see the
IKE packet return are you talking about the UDP 500 ISAKMP packet or protocol
50 packets?
Do you have other users
that can successfully use this FW for VPN?
When you say you are NATing
traffic where exactly is the NAT occuring? On the clien side or FW side?
-----Original
Message-----
From: Steven Zimmerman [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 08,
2001 8:14 PM
To: Fw1 Mailing List
(E-mail)
Subject: [FW1] Secure Remote and NAT
issues
I have a client that is
using 2 Nokia IP440 with ipso 3.2.1 and FW-1 4.0SP5
I can not get Secure Remote
to work via NAT. I did all the changes
(objects.C, my firewall
rules, etc) but this one client will not work.
Using IKE I see my request
sent out and I receive back an IKE packet from
the firewall but I always
get Error: Communication with the site x.x.x.x has
failed.
Any thoughts??
BTW> I can get into
other sites via the same secure remote client and
network.
Thanks in
advance!
Steven
Zimmerman
CIO
IR Network Solutions
770-277-9877
x224
770-237-5497 fax
================================================================================
To
unsubscribe from this mailing list, please see the instructions
at
http://www.checkpoint.com/services/mailing.html
================================================================================
