Forget about this, I had made a mistake during my configuration,
everything is working as expected now.

Met vriendelijke groeten - Bien � vous - Kind regards

Guy ROELANDTS
EMEA GS Internet Expertise Centre - CCSA & CCSE
Compaq Software Engineer - Belgium
E-mail : [EMAIL PROTECTED]
Tel: +32(02)729.77.44 (options  3 - 3 - 1)
Fax: +32(02)729.77.65

=====================================================================
This message may contain confidential and/or proprietary information,
and is intended only for the person/entity to whom it was originally
addressed. The content of this message may contain private views and
opinions which do not constitute a formal disclosure or commitment
unless specifically stated. Should you receive this message by mistake
please inform the sender immediately.
=====================================================================



-----Original Message-----
From: Roelandts, Guy 
Sent: Wednesday, September 05, 2001 5:16 PM
To: '[EMAIL PROTECTED]'
Subject: [FW1] Fw-1 4.1 & Solaris 2.6



Hello,

   Till yesterday I had installed FW-1 on Win Nt - Win 2K and IPSO
 only, now I have it installed on a Solaris 2.6 too but am having
 two problems/questions :

        1. Where do you put the arp -s and the route add commands in,
                I suspect there is a standard place in Solaris to put
                these commands, but I don't have a lot of Solaris
                experience

        2. This Firewall has a separate management server, I can down
                load it's security policy just fine, but some other
                Firewalls can't load theirs, using this Sun as a Gateway.
                Just before we had a Windows Nt that was acting as the
                Gateway. All I did was remove the proxy arp and route from
                this Nt system and add them to the Sun. When I ping to my
                Management Server NAT'ted address I get the MAC address of
                the Sun in the arp tables, so this seems to work, I also
                made sure the needed FW1 services were allowed through the
                Sun and they work, I can see accepts in my log viewer.

                So what could be wrong ? What could I have forgotten ?

  Appreciate any help or hints on this.

Met vriendelijke groeten - Bien � vous - Kind regards

Guy ROELANDTS
EMEA GS Internet Expertise Centre - CCSA & CCSE
Compaq Software Engineer - Belgium
E-mail : [EMAIL PROTECTED]
Tel: +32(02)729.77.44 (options  3 - 3 - 1)
Fax: +32(02)729.77.65

=====================================================================
This message may contain confidential and/or proprietary information,
and is intended only for the person/entity to whom it was originally
addressed. The content of this message may contain private views and
opinions which do not constitute a formal disclosure or commitment
unless specifically stated. Should you receive this message by mistake
please inform the sender immediately.
=====================================================================


============================================================================
====
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
============================================================================
====


================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================

Reply via email to