I am still struggling with high CPU use by the HTTP security servers. I
have been working with Checkpoint Israel for months and they are stumped.
The only solution offered is to throw a bigger (more cpu) server in place
of what I have. But I'm not convinced that would be a solution as the
number of connections running through this firewall don't appear to justify
more hardware.
I have about 3500 workstations sitting behind a 2 processor, 500mhz server
with 768mb of ram, running CP 4.1 (SP3) on NT 4.0, SP6a. I've charted the
values of the connections table every 15 seconds for weeks. With no
security servers involved we average 1800 or so connections. Most of our
traffic is HTTP. When I enable the HTTP security servers (i'm running one
on each processor) after about 10 minutes both processors max out at 100%
utiliazation and performance on the firewall goes down the drain. Looking
at task manager it is the individual security server processes that are
consuming all CPU.
Is anyone running this amount of workstations or connections thru their
firewall? Are you using the security servers? What processor, memory
configuration are you running?
----------------------------------------------------------------------------------------
Greg Winkler
Systems Manager, IT&S
Huntsman Corporation
Internet Mail: [EMAIL PROTECTED]
Voice: (713) 235-6018
Fax: (713) 235-6890
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
