On Tue, Mar 11, 2014 at 1:07 AM, Jamie Krasnoo <[email protected]> wrote: > I'm just learning about ZF2 and need to make sure I'm using the service > manager abstract factory configuration in application.config.php correctly > before I start jumping up and down and pointing out a bug. > > I'm using the Zend Skeletion Application as a base. In the > application.config.php file on the bottom is a config stub for the service > manager with the explanation that it will be the initial configuration to > seed the ServiceManager. I took this as a "place things here so you don't > have to repeat it in modules". Is this correct? > > So what I did is move the base abstract factory configuration from > Application's module config over to application.config.php. As soon as this > was done and I tested it. I started getting out of memory errors from PHP. I > went in to php.ini and changed the memory from 128M to 256M and tested > again. It still used up the memory. > > To try and trace the stack and see what's going on I installed xdebug and > set it up. I kept on running in to max nesting level errors. Hence the > thought that there is an infinite loop when abstract factories are placed in > application.config.php. Take it out and put that configuration back in to > module.config.php and the problem stops. > > I attached my log configuration for your viewing pleasure just in case that > is the problem and I did something wrong there.
Please report this via the issue tracker: https://github.com/zendframework/zf2/issues Thanks! -- Matthew Weier O'Phinney Project Lead | [email protected] Zend Framework | http://framework.zend.com/ PGP key: http://framework.zend.com/zf-matthew-pgp-key.asc -- List: [email protected] Info: http://framework.zend.com/archives Unsubscribe: [email protected]
